ER605 V2 2.3.0 Release date ?
The Uk download page is still offering ER605(UN)_V2_2.2.6 Build 20240718 as the latest release
When will the V2_2.3 Release be finally issued for public, ie non-beta use?
The latest Release candidate for V2_2.3 was issued in May 2025 but there is still no sign of the final release of this version
Thanks
Mhoam
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Download it from the US or EN sites here, its not a regional firmware.
https://static.tp-link.com/upload/firmware/2025/202505/20250528/ER605(UN)_V2.0_2.3.0%20Build%2020250428.zip
- Copy Link
- Report Inappropriate Content
You can find this firmware under the V2.20 hardware; it shares the same firmware as the V2 series.
- Copy Link
- Report Inappropriate Content
Download it from the US or EN sites here, its not a regional firmware.
https://static.tp-link.com/upload/firmware/2025/202505/20250528/ER605(UN)_V2.0_2.3.0%20Build%2020250428.zip
- Copy Link
- Report Inappropriate Content
You can find this firmware under the V2.20 hardware; it shares the same firmware as the V2 series.
- Copy Link
- Report Inappropriate Content
Thanks for the info and taking the time to post it, it is appreciated.
So do you think I am supposed to just know that this firmware is not regional and that the link you offered is suitable for a UK V2 ER605?
Is this "official" advice from TP-Link or just a comment from a random (sorry) person on a Community Forum?
My point is that if go to the UK TP-Link Download site, the latest version is not there. This is, at best, sloppy from TP-Link
cheers
mhoam
- Copy Link
- Report Inappropriate Content
Many thanks for the info, as you can see I have received different advice from another poster.
However, as your account is an official TP-Link one, I will of course follow it.
My other comment still applies, am I supposed to just know that V2 and V2.20 devices share the same firmware? If this is the case at the moment, will it still be so over the life of the kit? Why does the UK download site offer different versions of the firmware for V2 and V2.20 devices?
As I stated above, using the official UK download site for my device and version does NOT offer the latest version of the Firmware. This is very poor support from TP-Link
Again, your post is much appreciated but, sadly, it just shows TP-Link support in a really bad light.
cheers
mhoam
- Copy Link
- Report Inappropriate Content
My advice wasnt different - Ethan even marked it as recommended solution. You will see the link i provided you is exactly the same as any on the officil sites since i took it from the official site to save you time.
All non wireless routers (any ER series) has universal firmware that isnt regional. The only thing you have to make sure is that the Hardware version (v1.x v2.x) mnatches.
There is even a guide that tells you all about this pinned in the KB
- Copy Link
- Report Inappropriate Content
Many thanks for taking to time to explain, it is much appreciated.
However, your comment really makes my point :-)
on the US or EN site that you provided https://support.omadanetworks.com/uk/download/firmware/er605/v2.20/
if I match my actual hardware version, V2, it offers me 2.2.6
if I select the later V2.20 hardware it gives my 2.3.0
So if I followed your advice and only worried about the hardware Version number, I would not get the latest version!
Sorry, I can't find the KB to which you refer
- Copy Link
- Report Inappropriate Content
Thank you for your suggestion. Regarding your concern, V2 and V2.20 will continue to share the same firmware. I have also forwarded your feedback to the UK website team, urging them to upload the V2 firmware as soon as possible. As a temporary workaround, you can download the V2.3.0 firmware either from the V2.20 hardware page or from our global website.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 235
Replies: 8
Voters 0
No one has voted for it yet.