New Product Request: SG3210X-M2 with PoE or rack mount version of SG2210XMP-M2
The SG3210X-M2 and SG2210CMP-M2 are two good products that are almost, but not quite great. They both provide 8x 2.5G and 10x 10G SFP+, both are fan-less. That's awesome. However:
- SG3210X-M2 lacks PoE
- SG2210XMP-M2 has no rack mount option and has a power brick
In an ideal world these products would merge into one product!
Please pass to engineering to consider simplifying the 'Access Pro' product line by merging these two!
Keywords: rackmount fanless quiet
Thank you for your post. I will forward the feedback you provided to the relevant departments.
Secondly, regarding the issue you mentioned, our official website’s Spec sheet does not list the SG2210XMP-M2 as compatible with the RackMount Kit-D226—see the screenshot below.Spec Of RackMount Kit-D226
I found this "Coming Soon" D226 Rack Mount Kit that lists the SG2210XMP-M2 as one of the compatible models. The SG2210XMP-M2 is indeed 226mm wide, but in the images I have seen, lacks the screw holes this kit would require? Is there a matching hardware revision of the SG2210XMP-M2 coming that works with this kit?
Picture of SG2210XMP-M2 below has no screw holes for this D226 mount kit?
Turns out the 'coming soon' page I found is old, and these D226 kits are available for sale already, and list the SG2210XMP-M2 as compatible, even though all the images of the SG2210XMP-M2 lack the required screw-holes and the documentation says only "desktop / wall mount". Is there a particular hardware revision of SG2210XMP-M2 needed to be compatible with this kit?
Thank you for your post. I will forward the feedback you provided to the relevant departments.
Secondly, regarding the issue you mentioned, our official website’s Spec sheet does not list the SG2210XMP-M2 as compatible with the RackMount Kit-D226—see the screenshot below.Spec Of RackMount Kit-D226
Hi @Ethan-TP thanks for passing on the suggestion! And thanks for your reply. I followed your link but I get a different official website page with a table that says the D226 kit _is_ compatible SG2210XMP-M2. Maybe Australian product is different?
That same info is on all the Australian reseller sites I checked too, like my earlier screenshot. So I actually ordered a SG2210XMP-M2 and D226 kit since official website and resellers all said compatible. I figured the SG2210XMP-M2 must have had screw holes added more recently than the product photos. Is that not correct?
https://www.omadanetworks.com/au/business-networking/omada-accessory-rackmount-accessory/rackmount-kit-d226/
https://www.omadanetworks.com/au/business-networking/omada-accessory-rackmount-accessory/rackmount-kit-d226/
> The information currently shown on the AU website is incorrect, and I will escalate the issue again to have it amended.
@Ethan-TP ðŸ˜ðŸ˜ðŸ˜ðŸ˜ðŸ¥² Oh dear. I guess I have ordered a useless kit then!
You'll need to ask Aus office to also contact the retailers to get them to update their information. Most of the ones I check to order the D226 have the information copied from the official website, e.g.
