SSL certificate for omada controller OC200
Is there an SSL certificate for Omada controller OC200 I can use to get the "connection not secure" off the browser?
And also, my portal is very slow loading, about 45sec slow. Can anyhting be done about that?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@B_Star if you have a valid SSL certificate you can load it into the Controller under 'Settings' -> 'System Settings'.
There is no support for issuing certificates however. No Let's Encrypt HTTP or DNS authorization support. You have to issue or buy your own certificate and load it.
- Copy Link
- Report Inappropriate Content
Hi @B_Star
Here is the config guide for your reference:
How to Configure HTTPS Certificate to Avoid “Untrusted Certificate” Error
- Copy Link
- Report Inappropriate Content
@B_Star if you have a valid SSL certificate you can load it into the Controller under 'Settings' -> 'System Settings'.
There is no support for issuing certificates however. No Let's Encrypt HTTP or DNS authorization support. You have to issue or buy your own certificate and load it.
- Copy Link
- Report Inappropriate Content
@whereisaaron Thanks for the reply, I kindda read that already but I was hoping someone would point me to a reasonably priced SSL cert.
- Copy Link
- Report Inappropriate Content
@B_Star most SSL certificatesa are free now. And modern SSL certificates are only issued for ~90 days, so you need ACME automation to renew and install them. That is really a service that the Omada Controller or Gateway should be providing for all Omada devices. But we probably can't hold our breath for that! You can use free tools like EFF's Certbot and if you use a supported DNS provider it is very easy to issue free certificates. The trick is then to install them using Omada open API. I don't know if Omada provide CLI tools for that?
- Copy Link
- Report Inappropriate Content
@whereisaaron Thank you ever so much for this wonderful information. I will certainly follow your advice and action it.
- Copy Link
- Report Inappropriate Content
Hi @B_Star
Here is the config guide for your reference:
How to Configure HTTPS Certificate to Avoid “Untrusted Certificate” Error
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 190
Replies: 5
Voters 0
No one has voted for it yet.