ER707-M2 v1.20 Load balancing not according to bandwith ratio

ER707-M2 v1.20 Load balancing not according to bandwith ratio

ER707-M2 v1.20 Load balancing not according to bandwith ratio
ER707-M2 v1.20 Load balancing not according to bandwith ratio
a week ago
Model: ER707-M2  
Hardware Version: V1
Firmware Version: 1.2.3 Build 20240822 Rel.52946

The load balancing between two internet connections does not seem to be according to the bandwidth ratio.

 

WAN1 with 175 MBit/s up and 40 MBit/s down

 

 

WAN3 with 100 MBit/s up and 40 MBit/s down

 

 

Load Balancing:

 

 

Traffic Stats:

 

I would expect that because WAN1 has 1.75 the downstream of WAN3 to also roughly get 1.75 times the traffic. However, the gateway seems to route almost twice as much traffic over WAN3. What could be the issue? I don't have Bandwith Control, QoS  or Session Limit enabled

  0      
  0      
#1
Options
3 Reply
Re:ER707-M2 v1.20 Load balancing not according to bandwith ratio
a week ago - last edited a week ago

  @fvclaus 

 

First of all i would go with FW 1.31 and test again, it also covers the recent security issues with omada routers.

 

 

cu

ER707-M2 | SG2428P | SG2218 | SG2210P | SG2008P raspberry pi 5 8GB always recent Omada Software Controller@docker
  0  
  0  
#2
Options
Re:ER707-M2 v1.20 Load balancing not according to bandwith ratio
Monday

Thanks for pointing me in a direction  @kid63 . 

 

1.3.1 is not listed here:

 

I only found it here: https://support.omadanetworks.com/en/document/108306/?app=wifi-toolkit

But with no download link.

  0  
  0  
#3
Options
Re:ER707-M2 v1.20 Load balancing not according to bandwith ratio
Monday

  @fvclaus You should be able to download it from here:
https://static.tp-link.com/upload/firmware/2025/202510/20251017/ER707-M2(UN)_V1.0_1.3.1%20Build%2020251009.zip

 

Your specific model isn't region locked so that link should work for you. 

 

  0  
  0  
#4
Options