ER605v2 LAN Client l2tp VPN passthrough not working !
I use the ER605 ad my gateway for internet but it blocks VPN L2TP connections
from my client pc on LAN.
I was not able to connect to an external VPN L2TP server from my Win10 / Win11 pc,
but if I change the ER605 with my old Cisco RV320 it works !
So the problem seems to be the ER605.... it's the same problem describer here :
https://community.tp-link.com/en/business/forum/topic/667968
Please could you fix with a new firmware ?
Thanks, regards
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I can confirm this with er605v2 2.3.1 AND er8411 1.3.3 and 1.3.6 released to controller today
I will do a full write up when I get home
In my case external ipsec client to site vpns on macos connect but zero traffic to the external server and devices traverses the gateway
Interestingly my mobile banking app also won't authenticate on this firmware either
- Copy Link
- Report Inappropriate Content
Please confirm whether this issue only appeared after you upgraded to this firmware version.Try downgrading the firmware to isolate the problem.
Have you tested with different client ? When the connection fails, is there any error message, or what exactly does the failure look like?
- Copy Link
- Report Inappropriate Content
No the problem still exists with previous firmware releases !
I personally tested all releases from 2.2.1 to 2.3.1, all firmware with same problem.
No connection from L2TP clients on Lan (with router ER605) to an external server L2TP
Windows 10 / 11 native L2TP client and Mac OS native L2TP client.... so the problem
si the ER605 for sure !, if I change it with my old Cisco router all clients works....
Thanks, regards
- Copy Link
- Report Inappropriate Content
Thank you so much for taking the time to post the issue on the TP-Link community!
To better assist you, I've created a support ticket via your registered email address and escalated it to our support engineer to look into the issue. The ticket ID is TKID251113933 please check your email box and ensure the support email is well received. Thanks!
Once the issue is addressed or resolved, welcome to update this topic thread with your solution to help others who may encounter the same issue as you did.
Many thanks for your great cooperation and patience!
- Copy Link
- Report Inappropriate Content
Please refer to the FAQ below to confirm that your configuration steps are correct.
How to set up L2TP / IPsec VPN Client on Windows PC and MacBook
Why my Windows PC cannot connect to TP-Link L2TP VPN server?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 125
Replies: 5
Voters 0
No one has voted for it yet.