Business Community > Wireless > EAP6xx Pre-release Firmware Adapted to Omada Controller v6.1 (Release on 12 Nov, 2025)
< Wireless

Early Access EAP6xx Pre-release Firmware Adapted to Omada Controller v6.1 (Release on 12 Nov, 2025)

Early Access EAP6xx Pre-release Firmware Adapted to Omada Controller v6.1 (Release on 12 Nov, 2025)

Early AccessEAP6xx Pre-release Firmware Adapted to Omada Controller v6.1 (Release on 12 Nov, 2025)
EAP6xx Pre-release Firmware Adapted to Omada Controller v6.1 (Release on 12 Nov, 2025)
Wednesday - last edited Wednesday

This Article Applies To:

EAP610-outdoor V1  Fully Adapted to Omada SDN Controller v6.1 or above;

EAP610 V1  Fully Adapted to Omada SDN Controller v6.1 or above;

EAP610 V2  Fully Adapted to Omada SDN Controller v6.1 or above;

EAP620 HD V2 Fully Adapted to Omada SDN Controller v6.1 or above;

EAP620 HD V3 Fully Adapted to Omada SDN Controller v6.1 or above;

EAP660 HD V1  Fully Adapted to Omada SDN Controller v6.1 or above;

EAP660 HD V2  Fully Adapted to Omada SDN Controller v6.1 or above;

EAP623-outdoor HD V1 Fully Adapted to Omada SDN Controller v6.1 or above;

EAP625-outdoor HD V1 Fully Adapted to Omada SDN Controller v6.1 or above;

EAP655-Wall V1, Fully Adapted to Omada SDN Controller v6.1 or above;

 

Note

 

To update to this pre-release version, please make sure your device version is not lower than the version listed below:

EAP610_outdoor 1.0： 1.3.1 Build 20240828 Rel. 83596

EAP610 1.0： 1.3.1 Build 20240828 Rel. 83596

EAP610 2.0： 1.3.1 Build 20240828 Rel. 83596

EAP620HD 2.0：1.3.1 Build 20240828 Rel. 82224

EAP620HD 3.0：1.3.1 Build 20240828 Rel. 82224

EAP623_outdoor HD 1.0：1.3.1 Build 20240929 Rel. 44649

EAP625_outdoor HD 1.0：1.3.1 Build 20240929 Rel. 44649

EAP660HD 1.0：1.3.2 Build 20240828 Rel. 82109

EAP660HD 2.0：1.2.0 Build 20240828 Rel. 85483

No limit for EAP655-Wall v1

 

Release Notes:

New Feature/ Enhancement:

1. Supported Omada APs of new VI.

2. Adapted to CE-RED certification.

3. Optimized configuration synchronization mechanism.

4. Optimized automatic adoption.

5. Optimized ACS mechanism.

6. Optimized DFS switching mechanism and radar wave conflict handling.

7. Optimized automatic bandwidth selection mechanism.

8. Optimized background scanning mechanism.

9. Optimized VLAN implementation mechanism.

10. Optimized Log reporting mechanism, adding logs related to DFS, CPU utilization, and more.

11. Optimized PPSK configuration process. Configuring a PPSK profile will only affect the modified entries.

12. Optimized FDB table management mechanism. Wireless connection information will be cleared when the FDB table changes.

13. Optimized CoA-ACK/NAK message cache mechanism.

14. Supported secure firmware download strategy.

15. Supported configuration of WPA3 Enterprise on the Standalone page.

16. Supported configuration of DNS adoption switch (Remote Adoption) on the Standalone page.

17. Supported EAP CLI command system.

18. Modified the default security policy of SSIDs in factory state.

19. Modified the verification rules for static IP configuration items on the Standalone page.

20. Solved the problem of redirection and adoption failure of devices in management state in NAT scenario.

21. Solved the Blast-RADIUS security vulnerability and added a message-authenticator attribute verification switch.

 

Bug Fixed:

1. Fixed frequent DFS switching issue.

2. Fixed frequent client disconnections/connection failures.

3. Fixed gradually increasing memory usage issue.

 

Beta Firmware Download

 

Attention

 

 Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!

 

EAP610_outdoor v1.0 _1.6.0_20251111 (Pre-release Version)
EAP610_v1.0 _1.6.0_20251111 (Pre-release Version)
EAP610_v2.0 _1.6.0_20251111 (Pre-release Version)
EAP620HD v2.0_1.6.0_20251111 (Pre-release Version)
EAP620HD v3.0_1.6.0_20251111 (Pre-release Version)
EAP660HD v1.0_1.6.0_20251111 (Pre-release Version)
EAP660HD v2.0_1.6.0_20251111 (Pre-release Version)
EAP623_outdoor HD v1.0_1.6.0_20251111 (Pre-release Version)
EAP625_outdoor HD v1.0_1.6.0_20251111 (Pre-release Version)
EAP655-Wall v1.0_1.6.0_20251111 (Pre-release Version)

 

Notes:

(1) Your device’s configuration won’t be lost after upgrading.

(2) The above firmware is fully adapted to Omada SDN Controller v6.1 and above

 

Update Log

 

12 Nov, 2025

Provide the pre-release link:

EAP610_outdoor v1.0 _1.6.0_20251111 (Pre-release Version)
EAP610_v1.0 _1.6.0_20251111 (Pre-release Version)
EAP610_v2.0 _1.6.0_20251111 (Pre-release Version)
EAP620HD v2.0_1.6.0_20251111 (Pre-release Version)
EAP620HD v3.0_1.6.0_20251111 (Pre-release Version)
EAP660HD v1.0_1.6.0_20251111 (Pre-release Version)
EAP660HD v2.0_1.6.0_20251111 (Pre-release Version)
EAP623_outdoor HD v1.0_1.6.0_20251111 (Pre-release Version)
EAP625_outdoor HD v1.0_1.6.0_20251111 (Pre-release Version)
EAP655-Wall v1.0_1.6.0_20251111 (Pre-release Version)

 

 

Feedback

 

Any further feedback on the new firmware, please feel free to comment below or start a new thread from HERE.

To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.

 

When reporting an issue, especially it's about firmware upgrade, it's suggested to include the following info:

  • Management mode (Controller or Standalone)
  • Device Model(s) and Hardware
  • Device Firmware (previous and current)

 

Thank you in advance for your great cooperation and support.

 

Recommended Threads

 

EAP65x | EAP67x Pre-release Firmware Adapted to Omada Controller v6.0 (Released on 18th Jun, 2025)

Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!

Current Available Solutions to Omada EAP Related Issues [Constantly Updated]

Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates

Wish you a happy life and smooth network usage!  >Omada US Enterprise Beta Program Launch< >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0      
 
  0      
 
#1
Options
9 Reply
Re:EAP6xx Pre-release Firmware Adapted to Omada Controller v6.1 (Release on 12 Nov, 2025)
Wednesday - last edited Wednesday

  @Vincent-TP This update seems to have disabled POE for my EAP655-wall even though it was showing checked in the controller. Unceck and re-check fixed it. My controller is on a switch POE powered from a 655-wall unit so unsure if that was part of the issue (as it would loose connectivity during the update)....

 

Upgraded from the previous 1.6.0 Build 20250530

 

I also got a note it failed on one of my wall units but checking the unit's version it shows its on the version listed above (1.6.0 Build 20251111)

  0  
  0  
#2
Options
Re:EAP6xx Pre-release Firmware Adapted to Omada Controller v6.1 (Release on 12 Nov, 2025)
Thursday

Hi  @GoodOmens 

 

Thanks for the feedback.

I’m a bit confused about your topology setup. Could you please describe your network topology again or provide a screenshot?

This update seems to have disabled POE for my EAP655-wall

>>>Do you mean the EAP won't obtian power from a POE supplier, or, the EAP655-wall works as a POE supplier and unable to provide power to other devices?

GoodOmens wrote

  @Vincent-TP This update seems to have disabled POE for my EAP655-wall even though it was showing checked in the controller. Unceck and re-check fixed it. My controller is on a switch POE powered from a 655-wall unit so unsure if that was part of the issue (as it would loose connectivity during the update)....

 

Upgraded from the previous 1.6.0 Build 20250530

 

I also got a note it failed on one of my wall units but checking the unit's version it shows its on the version listed above (1.6.0 Build 20251111)

 

Wish you a happy life and smooth network usage!  >Omada US Enterprise Beta Program Launch< >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#4
Options
Re:EAP6xx Pre-release Firmware Adapted to Omada Controller v6.1 (Release on 12 Nov, 2025)
Thursday - last edited Thursday

  @Vincent-TP The media cabinet switch (SG2008 v4.20) is POE powered off of the Family Room EAP. During the update the Media Cabinet switch never recovered (and has a server that has my Omada controller docker on it). The switch had all its lights off.  Using a wall wort to power the switch (so I could access my controller) I saw The 655-wall was showing the POE option enabled but switch was not powered by it. I was able to resolve the issue by toggling the enable POE option from ON->OFF->ON for that port on the 655-wall and was then able to remove the wall wort from powering it (so it went back to POE power).

 

  0  
  0  
#5
Options
Re:EAP6xx Pre-release Firmware Adapted to Omada Controller v6.1 (Release on 12 Nov, 2025)
Yesterday

  @Vincent-TP Are EAP615-wall abandoned or no longer updated? They dont show up on this update lists..

  0  
  0  
#6
Options
Re:EAP6xx Pre-release Firmware Adapted to Omada Controller v6.1 (Release on 12 Nov, 2025)
Yesterday

Hi  @GoodOmens 

 

Thank you for the explanation. It's clear now.

One more information: What device do you use to power on the EAP655-wall? A POE adapter or switch? Please also give us the model number of the device. Thank you.

GoodOmens wrote

  @Vincent-TP The media cabinet switch (SG2008 v4.20) is POE powered off of the Family Room EAP. During the update the Media Cabinet switch never recovered (and has a server that has my Omada controller docker on it). The switch had all its lights off.  Using a wall wort to power the switch (so I could access my controller) I saw The 655-wall was showing the POE option enabled but switch was not powered by it. I was able to resolve the issue by toggling the enable POE option from ON->OFF->ON for that port on the 655-wall and was then able to remove the wall wort from powering it (so it went back to POE power).

 

 

Wish you a happy life and smooth network usage!  >Omada US Enterprise Beta Program Launch< >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#7
Options
Re:EAP6xx Pre-release Firmware Adapted to Omada Controller v6.1 (Release on 12 Nov, 2025)
Yesterday

GoodOmens wrote

 

I also got a note it failed on one of my wall units but checking the unit's version it shows its on the version listed above (1.6.0 Build 20251111)

>>>Regarding to this, is it convenient to share a screenshot of the note? 

How many EAP655-wall do you have in total?

  @GoodOmens 

Wish you a happy life and smooth network usage!  >Omada US Enterprise Beta Program Launch< >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#8
Options
Re:EAP6xx Pre-release Firmware Adapted to Omada Controller v6.1 (Release on 12 Nov, 2025)
Yesterday - last edited Yesterday

  @Vincent-TP SG2210MP v4.20. It's showing 32.90W / 150.00W across all devices.

 

I have 4 EAP 655-walls. Below is the screenshot

 

I tried hitting reschedule but got a different error that the devices was up-to-date as I didn't realize it was on 1.6.0 Build 20251111 Rel. 42814 when I hit re-schedule. It's possible the controller was offline during a portion of the update (due to it being downstream from a different wall unit) and caused it? But all devices completed the update.

  0  
  0  
#9
Options
Re:EAP6xx Pre-release Firmware Adapted to Omada Controller v6.1 (Release on 12 Nov, 2025)
Yesterday

Hi  @crrodriguez 

 

It’s not the case. We will continue rolling out updates for EAP615-wall.
The absence from this list is because this model is maintained by a different team with a separate update schedule. 

crrodriguez wrote

  @Vincent-TP Are EAP615-wall abandoned or no longer updated? They dont show up on this update lists..

 

Wish you a happy life and smooth network usage!  >Omada US Enterprise Beta Program Launch< >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#10
Options
Re:EAP6xx Pre-release Firmware Adapted to Omada Controller v6.1 (Release on 12 Nov, 2025)
16 hours ago

What about the EAP-650 v1? 

  0  
  0  
#11
Options

Information

Helpful: 0

Views: 400

Replies: 9

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.