Real routing table - where to find it?

Real routing table - where to find it?

Real routing table - where to find it?
Real routing table - where to find it?
Friday - last edited 8 hours ago
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.3.1 Build 20251015 Rel.78291

Hi all,

 

just wondering how I can get the actual and real table of the ER605 gateway.

The CLI knows only one single command "show ip route static" showing the user configured static routes...

 

Even by ISP issued xDSL Zyxel DX3101 router with proprietary FW is able to display it. not mentioning any OpenWRT based router.....

 

For any serious network issue (involving more than the single default LAN) troubleshooting is this info crucial

 

/BR ZoloNN ----------------------------------------------------------------------------------- Omada 2x ER605(UN) v2.0 + SG2008P(UN) V3.20 + SG2218 V1.20 + 2x SG2008 V4.20 + 3x EAP615-Wall(EU) V1.0
  0      
  0      
#1
Options
1 Accepted Solution
Re:Real routing table - where to find it?-Solution
8 hours ago - last edited 8 hours ago

Hi  @ZoloNN 

 

Is your controller V6?

You can see the routing table under the gateway's device page, see below:

 

For controller 5.15, it's under Insights > Routing Table:

 

Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:Real routing table - where to find it?-Solution
8 hours ago - last edited 8 hours ago

Hi  @ZoloNN 

 

Is your controller V6?

You can see the routing table under the gateway's device page, see below:

 

For controller 5.15, it's under Insights > Routing Table:

 

Recommended Solution
  0  
  0  
#2
Options
Re:Real routing table - where to find it?
an hour ago

Hi @Vincent-TP,

 

thanks, found it.... I'm little bit confused by the V6 interface as some things were moved and some apparently removed...

 

/BR ZoloNN ----------------------------------------------------------------------------------- Omada 2x ER605(UN) v2.0 + SG2008P(UN) V3.20 + SG2218 V1.20 + 2x SG2008 V4.20 + 3x EAP615-Wall(EU) V1.0
  0  
  0  
#3
Options