This Article Applies To:

 

EAP772 V2, Fully Adapted to Omada SDN Controller v6.1 or above;

EAP770 V2, Fully Adapted to Omada SDN Controller v6.1 or above;

EAP772-outdoor V1, Fully Adapted to Omada SDN Controller v6.1 or above;

EAP723 V1, Fully Adapted to Omada SDN Controller v6.1 or above;

EAP787 V1, Fully Adapted to Omada SDN Controller v6.1 or above;

 

Note

To update to this pre-release version, please make sure your device version is not lower than the version listed below:

EAP772 V2: 1.3.2 and above

EAP770 V2: 1.3.2 and above

EAP772-outdoor V1: 1.3.2 and above

EAP723 V1: 1.3.2 and above

EAP787 V1: 1.1.2 and above;

 

Download the EAP787 v1 1.1.2 from TP-Link official website first. If you can't find this version, download this version instead:

 

EAP787v1_1.1.2_[20251013-rel32717

 

Important note for EAP787 v1 1.1.2: This firmware upgrade is irreversible. Contact Omada technical support if a downgrade is required.

 

 

Release Notes:

New Feature/ Enhancement:

1. Optimized configuration synchronization mechanism.
2. Optimized automatic adoption.
3. Optimized ACS mechanism.
4. Optimized DFS switching mechanism and radar wave conflict handling.
5. Optimized automatic bandwidth selection mechanism.
6. Optimized background scanning mechanism.
7. Optimized VLAN implementation mechanism.
8. Optimized the Log reporting mechanism, adding logs related to DFS, CPU utilization, and more.
9. Optimized PPSK configuration process. Configuring a PPSK profile will only affect the modified entries.
10. Optimized FDB table management mechanism. 
11. Optimized CoA-ACK/NAK message cache mechanism.
12. Supported secure firmware download strategy.
13. Supported configuration of WPA3 Enterprise on the Standalone page.
14. Supported configuration of DNS adoption switch (Remote Adoption) on the Standalone page.
15. Modified the default security policy of SSIDs in factory state.
16. Modified the verification rules for static IP configuration items on the Standalone page.
17. Solved the problem of redirection and adoption failure of devices in the management state in the NAT scenario.
18. Solved the Blast-RADIUS security vulnerability and added a message-authenticator attribute verification switch.

 

Beta Firmware Download

 

Attention

 

Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!

 

 

 

EAP772 v2.0_1.4.0_20251210-rel43868 (Pre-release Version)
EAP770 v2.0_1.4.0_20251210-rel43868  (Pre-release Version)
EAP772-outdoor v1.0_1.4.0_20251210-rel43868 (Pre-release Version)
EAP723 v1.0_1.4.0_20251210-rel43868 (Pre-release Version)
EAP787 v1.0_1.4.0_20251210-rel43868 (Pre-release Version)

 

 

 

EAP772 v2.0_1.4.0_20251205-rel68459 (Pre-release Version)
EAP770 v2.0_1.4.0_20251205-rel68459 (Pre-release Version)
EAP772-outdoor v1.0_1.4.0_20251205-rel68459 (Pre-release Version)
EAP723 v1.0_1.4.0_20251205-rel68459 (Pre-release Version)
EAP787 v1.0_1.4.0_20251205-rel68459 (Pre-release Version)

 

 

Notes:

(1) Your device’s configuration won’t be lost after upgrading.

(2) The above firmware is fully adapted to Omada SDN Controller v6.1 and above

 

 

Update Log

 

11th Dec, 2025

 

1. Provide the link for EAP787 V1 1.1.2;

 

2. Update the pre-release version to the following version:

EAP772 v2.0_1.4.0_20251210-rel43868 (Pre-release Version)
EAP770 v2.0_1.4.0_20251210-rel43868  (Pre-release Version)
EAP772-outdoor v1.0_1.4.0_20251210-rel43868 (Pre-release Version)
EAP723 v1.0_1.4.0_20251210-rel43868 (Pre-release Version)
EAP787 v1.0_1.4.0_20251210-rel43868 (Pre-release Version)

 

 

 

8th Dec, 2025

Provide the pre-release link:

EAP772 v2.0_1.4.0_20251205-rel68459 (Pre-release Version)
EAP770 v2.0_1.4.0_20251205-rel68459 (Pre-release Version)
EAP772-outdoor v1.0_1.4.0_20251205-rel68459 (Pre-release Version)
EAP723 v1.0_1.4.0_20251205-rel68459 (Pre-release Version)
EAP787 v1.0_1.4.0_20251205-rel68459 (Pre-release Version)

 

 

Feedback

 

Any further feedback on the new firmware, please feel free to comment below or start a new thread from HERE.

To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.

 

When reporting an issue, especially it's about a firmware upgrade, it's suggested to include the following info:

• Management mode (Controller or Standalone)
• Device Model(s) and Hardware
• Device Firmware (previous and current)

 

Thank you in advance for your great cooperation and support.

 

Recommended Threads

 

Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!

Current Available Solutions to Omada EAP Related Issues [Constantly Updated]

Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates