Business Community > Gateways > ER706W not used in mesh mode
< Gateways

ER706W not used in mesh mode

ER706W not used in mesh mode

ER706W not used in mesh mode
ER706W not used in mesh mode
Yesterday
Model: ER706W  
Hardware Version: V1
Firmware Version:

Hi, I'm interested in purchasing the ER706W. I want to use it as a router and also to replace my indoor EAP265HD, since it has Wi-Fi 6. If I add this to my Omada Switch, OC200 and other eaps, can this also work as a wired AP vs in mesh mode. All my other eaps are wired. I just don't want to use mesh. Also would it be more beneficial to just replace my indoor EAP265HD instead? I'm currently using pfsense for openvpn, but it doesn't always work and I'm thinking about just going with a dedicated VPN router, but I still want to conserve most of my 500mb speed, I know openvpn will slow things down, especially if I use a lower powered router. Would this suit my needs or should I just go with ER8411 and replace my eaps? I'm using indoor and outdoor Wi-Fi 5 eaps. Thank you for taking the time to read this question. 

  0      
 
  0      
 
#1
Options
5 Reply
Re:ER706W not used in mesh mode
Yesterday

  @testcrash 

 

I have an ER706W here as a backup gateway.  It is a gateway and AP in the same device.  However, it does not have an AP only mode.  You must set up the gateway to use the wireless functions.

 

1x ER7406 1x OC300 4x SG2008 1x EAP610 3x EAP650-Desktop
  0  
  0  
#2
Options
Re:ER706W not used in mesh mode
18 hours ago

  @jra11500 I understand that part, what I'm asking is if it only works in mesh with other eaps? I don't want my network to be in mesh, I've run CAT6A throughout my property for the eaps and my poe cameras. The ER706W would be behind the ONT and in front of my POE switch. So I can use the ER706W in the server room as my main eap and the others will be used as they are now, everything is controlled by an OC200. I have everything except for the ER706W and everything is set up already. 

  0  
  0  
#3
Options
Re:ER706W not used in mesh mode
18 hours ago

  @testcrash 

 

no it doesn't just work in mesh, it's already built into the router, but if you want to mesh other access points from somewhere else it has the option to do that. or use cable like you do.

 

  0  
  0  
#4
Options
Re:ER706W not used in mesh mode
14 hours ago

  @MR.S thank you. Do you happen to know anything about its openvpn performance? Would it be anything close to the ER8411? 

  0  
  0  
#5
Options
Re:ER706W not used in mesh mode
12 hours ago

  @testcrash 

 

no it's not close to the ER8411, looking at the specs I think they match up pretty well.

 

 

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 58

Replies: 5

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.