TP-Link EAP600 to multiple Ubiquiti Litebeam M5s
Hi,
Can someone please guide a relative newby through what essential settings on both ends would be required to distribute wifi from an internet source wired to the EAP600?
Regards, MW.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thanks for posting there.
EAP devices are plug-and-play. Use an Ethernet cable, plug the EAP into the Internet source, and you will get Internet from its default SSID.
You may want to modify the WLAN name of the EAP Below is a guide:
How to configure basic wireless settings of my TP-Link EAP in Standalone mode?
For a basic Internet connection, this is enough. Feel free to let us know if you want any other features.
- Copy Link
- Report Inappropriate Content
Thanks for posting there.
EAP devices are plug-and-play. Use an Ethernet cable, plug the EAP into the Internet source, and you will get Internet from its default SSID.
You may want to modify the WLAN name of the EAP Below is a guide:
How to configure basic wireless settings of my TP-Link EAP in Standalone mode?
For a basic Internet connection, this is enough. Feel free to let us know if you want any other features.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
To optimize the performance, you may refer to this link:
How to optimize wireless performance of EAP products
To build a long-range wireless bridge, you may consider EAP wireless bridge products. Here is a link:
https://www.omadanetworks.com/en/business-networking/omada-wifi-wireless-bridge/
- Copy Link
- Report Inappropriate Content
@Vincent-TP Thanks - I'll have a gander...
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 265
Replies: 4
Voters 0
No one has voted for it yet.