This Article Applies to:

 

EAP235-Wall  V1, Fully Adapted to Omada SDN Controller v5.14 or above;

EAP230-Wall  V1, Fully Adapted to Omada SDN Controller v5.14 or above;

 

Note:

 

Minimum FW Version for Update:

EAP235-Wall  V1:  v3.2.4

EAP230-Wall  V1:  v3.2.4

 

 

Release Notes:

 

New Feature/ Enhancement:

 

1. Supported Portal Logout.
2. Supported cluster deployment in Local Controller mode (Omada Central doesn’t support).
3. Supported RADIUS Proxy(Global View> Server Settings> Radius Proxy Server).
4. Supported upgrading firmware through cloud in standalone mode.
5. Supported Rate Limit with Portal Authentication.
6. Supported disabling HTTP protocol in Standalone mode.
7. Supported DHCP Option43.
8. Supported multiple Radius servers when using MAC-Based Authentication (Site View Settings>MAC-Based Authentication).
9. Added support for configuring NAS ID with WPA-Enterprise encryption.
10. Supported DNS Queries (Network Tools>Network Check>DNSLookup).
11. Supported DNS Adoption.
12. Supported configuring the Device Name in Controller mode.
13. Supported viewing status information and simple configuration through standalone management page when devices managed by the Controller.
14. Supported displaying the maximum associated clients range in Controller mode(EAP Config>Advanced>Load Balance).
15. Supported displaying the bandwidth of the EAP in Controller mode.
16. Supported multicast and broadcast data statistics.
17. Supported Non-stick Roaming function.
18. Supported authentication type of EKMS and Generic Radius with Unbound MAC for PPSK with Radius.
19. Supports 1024 PPSK entries.
20. Supported Multicast Filtering with IPv6 address.
21. Supported Multicast/Broadcast Rate Limit
22. Supported displaying Configuration Result.
23. Optimized roaming function.
24. Optimized Automatic Power Optimization function.
25. Optimized the configuration of Beacon Interval.
26. Optimized Portal Function.
27. Improved Device and Network security.
28. Improved stability.

 

Bug Fixed：

1. Fixed the issue that RSSI display error in WLAN Optimization.
2. Fixed the issue that URL Filtering cannot work properly after TLS1.3 is enabled in the browser.
3. Fixed the issue that HTTPS Redirection and Pre-Authentication Access don’t take effect when use portal.

 

Pre-release Firmware Download

 

Attention

 

 Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!

 

EAP235-Wall_V1_3.3.1_20251203-rel58135 (Pre-release)
EAP230-Wall_V1_3.3.1_20251203-rel58135 (Pre-release)

 

Notes:

(1) Your device’s configuration won’t be lost after upgrading.

(2) The above firmware is fully adapted to Omada SDN Controller v5.14 and above

 

Update Log

 

18th Dec, 2025

Provide the following pre-release link:

EAP235-Wall_V1_3.3.1_20251203-rel58135 (Pre-release)
EAP230-Wall_V1_3.3.1_20251203-rel58135 (Pre-release)

 

Feedback

 

Any further feedback on the new firmware, please feel free to comment below or start a new thread from HERE.

To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.

 

When reporting an issue, especially it's about firmware upgrade, it's suggested to include the following info:

• Management mode (Controller or Standalone)
• Device Model(s) and Hardware
• Device Firmware (previous and current)

 

Thank you in advance for your great cooperation and support.

 

Recommended Threads

 

Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!

Current Available Solutions to Omada EAP Related Issues [Constantly Updated]

Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates