Business Community > Gateways > SNMP via Omada Controller
< Gateways

SNMP via Omada Controller

SNMP via Omada Controller

SNMP via Omada Controller
SNMP via Omada Controller
a week ago
Tags: #SNMP
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.1.2 Build 20230210 Rel.62992

Good day Community,

 

We have an issue where the SNMP data is not able to pull through when the gateway is connected and managed by the (omada network controller v5.15.24.18), but when I have it in standalone mode on the same internet connection SNMP is active and working, 

 

I have tried updating the firmware to the latest to test and down again, but I'm still unsuccessful.

 

Thank you in advance. 

  0      
 
  0      
 
#1
Options
6 Reply
Re:SNMP via Omada Controller
a week ago

 Hi @Oasis-IT 

Thanks for posting in our business forum.

Did you try to update the firmware for both of your ER605 V2 and Omada Controller? May I ask what are the current versions of them?

Is it possible that you can provide the configuration screenshots of both in standalone mode and Controller mode of SNMP for our reference?

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:SNMP via Omada Controller
Tuesday

Good day,  @Hank21 thank you for your reply,

Please see below version of the controller and ER605v2, 

 

Controller

5.15.24.18

 

Gateway

2.1.2 Build 20230210 Rel.62992

 

For the ER605v2 I have tried upgrading and downgrading to the current version to attempt resolving this issue with no luck. 

 

 

  0  
  0  
#3
Options
Re:SNMP via Omada Controller
Wednesday

Hi  @Oasis-IT 

Thanks for your valued reply.

Could you provide the configuration screenshots both when you manage the ER605 in standalone mode and Omada Controller for our references?

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#4
Options
Re:SNMP via Omada Controller
Wednesday

  @Hank21 

standalone

controller

 

  0  
  0  
#5
Options
Re:SNMP via Omada Controller
Yesterday

Hi  @Oasis-IT 

Thanks for your valued reply.

Can you help to clarify the details. As it was mentioned that the SNMP "unable to pull through," when the ER605 managed by Controller, but what are the specific contact issues?

For example, can the router be contacted via SNMP software? Is it impossible to connect, or does it mean that attempting to walk the nodes doesn't return any data?

It would be much appreciated if any screenshot to show the issue is provided.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#6
Options
Re:SNMP via Omada Controller
Yesterday

  Good day  @Hank21 

 

Yes correct, in standaloone mode as below with snmp software it returns data, but when its connected to the omada controller, snmp data is not being returned to the software.

 

 

Standalone:

Controller:

  0  
  0  
#7
Options

Information

Helpful: 0

Views: 158

Replies: 6

Tags

SNMP
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.