Early Access Omada ES_Series Pre-Release Firmware for SDN Controller 6.1.X.X (Released on February 10th, 2026)
This Article Applies to
ES205G(UN) 1.0
ES205GP(UN) 1.0
ES206GP(UN) 1.0
ES208G(UN) 1.0
ES208GP(UN) 1.0
ES210GMP(UN) 1.0
ES216G(UN) 1.0
ES220GMP(UN) 1.0
ES220GP(UN) 1.0
ES224G(UN) 1.0
ES228GMP(UN) 1.0
ES228GP(UN) 1.0
Release Notes
New Features:
1.Added support for HTTPS in standalone mode.
2.Added port name configuration in standalone mode.
3.Added support for EEE in controller mode.
4.Added support for clustering in controller mode.
5.Added support for LLDP global switch in both standalone mode and controller mode.
6.Added support for QoS rules in controller mode.
7.Added support for retaining partial standalone configurations such as IP and management Vlan when adopted by the controller.
8.Added support for device health in controller mode.
9.Added support for reporting port TX and RX rates in controller mode.
Enhancements:
1.Optimized VLAN configuration and port isolation in standalone mode.
2.Optimized basic QoS in standalone mode.
3.Added port-based loop detection switch in standalone mode.
4.Added Option 12 and Option 60 fields for DHCP.
5.Added Option 43 and DNS adoption to adopted method.
6.Enhance security.
7.Disabled IGMP snooping by default.
8.Added port-based fast leave for IGMP snooping in standalone mode and controller mode.
9.Added report suppression for IGMP snooping in controller mode.
10.Added port-based locate in controller mode.
11.Added encryption for configuration files in standalone mode.
12.Added login attempt limits in standalone mode.
Firmware Download
Before the Upgrade
(1) Please be sure you have read the Pre-release Firmware Agreement before upgrading the Beta firmware!
(2) You may follow the following guide to upgrade your Omada devices. How to Upgrade/Downgrade Omada Switches
Firmware Download Link
Notes:
(1) The above firmware is applied to matching hardware.
(2) Your device’s configuration won’t be lost after upgrading.
Additional Information
All feedback is welcome, including letting us know about successful device upgrades.
If somehow you encounter an issue during or after the upgrade, it's suggested to contact us with the following info:
- Omada Controller version if you have any.
- Device Firmware version with Build number (previous and current)
If your model gets bricked during the firmware upgrade, you may follow the guide below to recover the firmware.
Configuration Guide How to Upgrade/Downgrade Omada Switches
Update Log
February 10th, 2026
Release of this article.
Recommended Threads
Omada_Network_Application_V6.1.x.x Pre-Release Firmware (Updated on 31st Dec, 2025)
Hardware Controllers Omada SDN Controller 6.1 Pre-Release Firmware (Updated on 31st Dec, 2025)
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Exactly. I do also NOT understand why this is so difficult and it takes ages to fix that. It is so anoying.
- Copy Link
- Report Inappropriate Content
The plan is to display the IP addresses of these devices via firmware upgrades to the SDN routers, not to the switches. Therefore, we recommend you pay attention to the router’s firmware updates. Thank you!
TheMuk wrote
New Beta firmware available today. I just think it is exact the same one when I read the Change Log. Also still NO ARP update or any other way we see the IP's of the clients :(
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi @Elizabeth12
You may test the new features mentioned and get back to us here promptly once there is any abnormal situation.
- Copy Link
- Report Inappropriate Content
@Yann77
Hello, I'm taking the liberty of reinstalling this firmware on an Omada ES-228 GMP V1 switch which, after some time, forced me to roll back.
En effet je me suis retrouver avec des probleme de VLAN et de ACL qui ne prennez en compte que ce qu'il voulais.
En changant de firmware en arriere tout est revenu a la normal.
- Copy Link
- Report Inappropriate Content
Hello, are you saying that when a device has a static IP address, its IP address doesn't appear in the list?
If that's the case, I can confirm that it's extremely annoying.
- Copy Link
- Report Inappropriate Content
Hi would like to report an issue ES206GP V1.0 to V1.0.6 Build 20260325 Rel.31583 after updating to the I noticed that after a power faliuer the connected devices don't connect to switch, I have to use POE recovery to bring the decives back online. Thanks
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 3792
Replies: 27
Voters 0
No one has voted for it yet.