This Article Applies To:

EAP723 V1, Fully Adapted to Omada SDN Controller v6.2 or above;
EAP770 V2, Fully Adapted to Omada SDN Controller v6.2 or above;
EAP772-outdoor V1, Fully Adapted to Omada SDN Controller v6.2 or above;
EAP772 V2, Fully Adapted to Omada SDN Controller v6.2 or above;
EAP787 V1, Fully Adapted to Omada SDN Controller v6.2 or above;
EAP720 V1, Fully Adapted to Omada SDN Controller v6.2 or above;
EAP723 V2, Fully Adapted to Omada SDN Controller v6.2 or above;
EAP725-outdoor V1, Fully Adapted to Omada SDN Controller v6.2 or above;
EAP725-Wall V1, Fully Adapted to Omada SDN Controller v6.2 or above;

Note

To update to this pre-release version, please make sure your device version is not lower than the version listed below:

EAP723 V1: 1.3.2 Build 20250901 Rel. 52255
EAP770 V2: 1.3.2 Build 20250901 Rel. 52255
EAP772-outdoor V1: 1.3.2 Build 20250901 Rel. 52255
EAP772 V2: 1.3.2 Build 20250901 Rel. 52255
EAP787 V1: 1.1.2 Build 20251013 Rel. 32717 
EAP720 V1: 1.1.2 Build 20250901 Rel. 74897
EAP723 V2: 1.1.2 Build 20250901 Rel. 74897
EAP725-outdoor V1: 1.0.3 Build 20250822 Rel. 52531
EAP725-Wall V1: 1.1.2 Build 20250901 Rel. 74897

Release Notes:

New Features

1. Added the Omada Config tool for batch configuration of Omada devices.
2. Added portal authentication/deauthentication buttons to the client list in the web interface.
3. Added CLI commands to support iPerf3 speed tests.

Enhancement

1. Optimized device cloud upgrade timeout scenarios, supporting breakpoint resume functionality.
2. Optimized AP LAN port status display on the controller.
3. Optimized system stability.
4. Optimized the client list display on the web interface, adding the guest client list.

Bugs Fixed

1. Fixed the issue where the ACL allow list for inter-terminal communication was not effective when guest networks were enabled.
2. Fixed topology display anomalies in some scenarios.
3. Fixed anomalies in data statistics for certain wired scenarios.
4. Fixed the issue where guest clients could not access the portal logout page.
5. Fixed the issue where wired terminals still appeared online after being offline for 5 minutes.
6. Fixed the issue where PPSK configuration changes did not take effect promptly on controllers earlier than V5.14.

Beta Firmware Download

Attention

Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!

EAP723_v1_1.5.0_20260121-rel65599(pre-release version)
EAP770 _v2_1.5.0_20260121-rel65599(pre-release version)
EAP772-outdoor _v1_1.5.0_20260121-rel65599(pre-release version)
EAP772 _v2_1.5.0_20260121-rel65599(pre-release version)
EAP787 _v1_1.5.0_20260121-rel65599(pre-release version)
EAP720 _v1_1.3.0_20260121-rel65599(pre-release version)
EAP723 _v2_1.3.0_20260121-rel65599(pre-release version)
EAP725-outdoor_v1_1.3.0_20260121-rel65599(pre-release version)
EAP725-Wall_v1_1.3.0_20260121-rel65599(pre-release version)
 

Notes:

(1) Your device’s configuration won’t be lost after upgrading.

(2) The above firmware is fully adapted to Omada SDN Controller v6.2 and above.

(3) This pre-release firmware can be applied to all versions (EU/US/AU/CA/etc).

Update Log

23rd Jan, 2026

Provide the pre-release link:

EAP723_v1_1.5.0_20260121-rel65599(pre-release version)
EAP770 _v2_1.5.0_20260121-rel65599(pre-release version)
EAP772-outdoor _v1_1.5.0_20260121-rel65599(pre-release version)
EAP772 _v2_1.5.0_20260121-rel65599(pre-release version)
EAP787 _v1_1.5.0_20260121-rel65599(pre-release version)
EAP720 _v1_1.3.0_20260121-rel65599(pre-release version)
EAP723 _v2_1.3.0_20260121-rel65599(pre-release version)
EAP725-outdoor_v1_1.3.0_20260121-rel65599(pre-release version)
EAP725-Wall_v1_1.3.0_20260121-rel65599(pre-release version)

Feedback

Any further feedback on the new firmware, please feel free to comment below or start a new thread from HERE.

To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.

When reporting an issue, especially it's about a firmware upgrade, it's suggested to include the following info:

• Management mode (Controller or Standalone)
• Device Model(s) and Hardware
• Device Firmware (previous and current)

Thank you in advance for your great cooperation and support.

Recommended Threads

Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!

Current Available Solutions to Omada EAP Related Issues [Constantly Updated]

Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates