Early Access EAP7xx Fully Adapted to Omada 6.2 Pre-release Firmware (Update on 15th Apr, 2026)
This Article Applies To:
EAP723 V1, Fully Adapted to Omada SDN Controller v6.2 or above;
EAP770 V2, Fully Adapted to Omada SDN Controller v6.2 or above;
EAP772-outdoor V1, Fully Adapted to Omada SDN Controller v6.2 or above;
EAP772 V2, Fully Adapted to Omada SDN Controller v6.2 or above;
EAP787 V1, Fully Adapted to Omada SDN Controller v6.2 or above;
EAP720 V1, Fully Adapted to Omada SDN Controller v6.2 or above;
EAP723 V2, Fully Adapted to Omada SDN Controller v6.2 or above;
EAP725-Wall V1, Fully Adapted to Omada SDN Controller v6.2 or above;
EAP775-Wall V1, Fully Adapted to Omada SDN Controller v6.2 or above;
Note
To update to this pre-release version, please make sure your device version is not lower than the version listed below:
EAP723 V1: 1.3.2 Build 20250901 Rel. 52255
EAP770 V2: 1.3.2 Build 20250901 Rel. 52255
EAP772-outdoor V1: 1.3.2 Build 20250901 Rel. 52255
EAP772 V2: 1.3.2 Build 20250901 Rel. 52255
EAP787 V1: 1.1.2 Build 20251013 Rel. 32717
EAP720 V1: 1.1.2 Build 20250901 Rel. 74897
EAP723 V2: 1.1.2 Build 20250901 Rel. 74897
EAP725-Wall V1: 1.1.2 Build 20250901 Rel. 74897
Release Notes:
New Features
- Added the Omada Config tool for batch configuration of Omada devices.
- Added portal authentication/deauthentication buttons to the client list in the web interface.
- Added CLI commands to support iPerf3 speed tests.
-
Added brute-force attack prevention for AP adoption via the controller.
-
Added the Load Balancing feature.
- Added the 6 GHz PPSK feature.
-
Added the time window setting for Adaptive WLAN Optimization.
-
Added the Wi-Fi Calling feature.
-
Added the NAT Traversal feature.
Enhancement
- Optimized device cloud upgrade timeout scenarios, supporting breakpoint resume functionality.
- Optimized AP LAN port status display on the controller.
- Optimized system stability.
- Optimized the client list display on the web interface, adding the guest client list.
- Optimized the LAN port status display for APs.
- Adjusted the Band Steering function to only apply to the SSID level.
- Added support for displaying the time of the latest GPS location acquisition on the controller.
Bugs Fixed
- Fixed the issue where the ACL allow list for inter-terminal communication was not effective when guest networks were enabled.
- Fixed topology display anomalies in some scenarios.
- Fixed anomalies in data statistics for certain wired scenarios.
- Fixed the issue where guest clients could not access the portal logout page.
- Fixed the issue where wired terminals still appeared online after being offline for 5 minutes.
- Fixed the issue where PPSK configuration changes did not take effect promptly on controllers earlier than V5.14.
- Fixed some known issues.
Beta Firmware Download
Attention
Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!
EAP723_v1_1.5.0_20260414 (pre-release version)
EAP770 _v2_1.5.0_20260414 (pre-release version)
EAP772-outdoor _v1_1.5.0_20260414 (pre-release version)
EAP772 _v2_1.5.0_20260414 (pre-release version)
EAP787 _v1_1.5.0_20260414(pre-release version)
EAP720 _v1_1.3.0_20260414 (pre-release version)
EAP723 _v2_1.3.0_20260414 (pre-release version)
EAP725-Wall_v1_1.3.0_20260414 (pre-release version)
EAP775-Wall_v1_1.5.0_20260414 (pre-release version)
EAP723_v1_1.5.0_20260316-rel11609(pre-release version)
EAP770 _v2_1.5.0_20260316-rel11609(pre-release version)
EAP772-outdoor _v1_1.5.0_20260316-rel11609(pre-release version)
EAP772 _v2_1.5.0_20260316-rel11609(pre-release version)
EAP787 _v1_1.5.0_20260316-rel11609(pre-release version)
EAP720 _v1_1.3.0_20260316-rel6471(pre-release version)
EAP723 _v2_1.3.0_20260316-rel6471(pre-release version)
EAP725-Wall_v1_1.3.0_20260316-rel6471(pre-release version)
EAP775-Wall_v1_1.5.0_20260316-rel11609(pre-release version)
EAP723_v1_1.5.0_20260121-rel65599(pre-release version)
EAP770 _v2_1.5.0_20260121-rel65599(pre-release version)
EAP772-outdoor _v1_1.5.0_20260121-rel65599(pre-release version)
EAP772 _v2_1.5.0_20260121-rel65599(pre-release version)
EAP787 _v1_1.5.0_20260121-rel65599(pre-release version)
EAP720 _v1_1.3.0_20260121-rel65599(pre-release version)
EAP723 _v2_1.3.0_20260121-rel65599(pre-release version)
EAP725-outdoor_v1_1.3.0_20260121-rel65599(pre-release version)
EAP725-Wall_v1_1.3.0_20260121-rel65599(pre-release version)
Notes:
(1) Your device’s configuration won’t be lost after upgrading.
(2) The above firmware is fully adapted to Omada SDN Controller v6.2 and above.
(3) This pre-release firmware can be applied to all versions (EU/US/AU/CA/etc).
Update Log
15th Apr, 2026
Update the pre-release link to the following:
EAP723_v1_1.5.0_20260414 (pre-release version)
EAP770 _v2_1.5.0_20260414 (pre-release version)
EAP772-outdoor _v1_1.5.0_20260414 (pre-release version)
EAP772 _v2_1.5.0_20260414 (pre-release version)
EAP787 _v1_1.5.0_20260414(pre-release version)
EAP720 _v1_1.3.0_20260414 (pre-release version)
EAP723 _v2_1.3.0_20260414 (pre-release version)
EAP725-Wall_v1_1.3.0_20260414 (pre-release version)
EAP775-Wall_v1_1.5.0_20260414 (pre-release version)
Update Content:
Added some new features and enhancements. For details, please check the blue part of the release notes.
16th Mar, 2026
Update the pre-release link to the following:
EAP723_v1_1.5.0_20260316-rel11609(pre-release version)
EAP770 _v2_1.5.0_20260316-rel11609(pre-release version)
EAP772-outdoor _v1_1.5.0_20260316-rel11609(pre-release version)
EAP772 _v2_1.5.0_20260316-rel11609(pre-release version)
EAP787 _v1_1.5.0_20260316-rel11609(pre-release version)
EAP720 _v1_1.3.0_20260316-rel6471(pre-release version)
EAP723 _v2_1.3.0_20260316-rel6471(pre-release version)
EAP725-Wall_v1_1.3.0_20260316-rel6471(pre-release version)
EAP775-Wall_v1_1.5.0_20260316-rel11609(pre-release version)
Update Note:
Fixed some known bugs.
30th Jan, 2026
Remove the download link of EAP725-outdoor.
23rd Jan, 2026
Provide the pre-release link:
EAP723_v1_1.5.0_20260121-rel65599(pre-release version)
EAP770 _v2_1.5.0_20260121-rel65599(pre-release version)
EAP772-outdoor _v1_1.5.0_20260121-rel65599(pre-release version)
EAP772 _v2_1.5.0_20260121-rel65599(pre-release version)
EAP787 _v1_1.5.0_20260121-rel65599(pre-release version)
EAP720 _v1_1.3.0_20260121-rel65599(pre-release version)
EAP723 _v2_1.3.0_20260121-rel65599(pre-release version)
EAP725-outdoor_v1_1.3.0_20260121-rel65599(pre-release version)
EAP725-Wall_v1_1.3.0_20260121-rel65599(pre-release version)
Feedback
Any further feedback on the new firmware, please feel free to comment below or start a new thread from HERE.
To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.
When reporting an issue, especially it's about a firmware upgrade, it's suggested to include the following info:
- Management mode (Controller or Standalone)
- Device Model(s) and Hardware
- Device Firmware (previous and current)
Thank you in advance for your great cooperation and support.
Recommended Threads
Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!
Current Available Solutions to Omada EAP Related Issues [Constantly Updated]
Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@mrmbman latest for now is here https://community.tp-link.com/en/business/forum/topic/854656
- Copy Link
- Report Inappropriate Content
thanks. That one is a few months old. Was hoping a newer one. I have to restart every couple weeks on this one (find MLO stops connecting to all channels, seems to be stuck on 2.4 and going slow).
- Copy Link
- Report Inappropriate Content
@mrmbman the 773 seems to be the red headed step child, seemingly something special about it compared to the other 700 series models that requires different firmware.
- Copy Link
- Report Inappropriate Content
@Vishlamba - I was having the same error on both of my EAPs, I was able to update my EAP787 and EAP775 by shortening the filename
- Copy Link
- Report Inappropriate Content
hi thanks, but the issue is now resolved with the new 6.2.0.15 update.
- Copy Link
- Report Inappropriate Content
I am still seeing the random loss of wifi for a minute from the 787 model with two units and two 775 wall units on the latest firmwares from this thread.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I wish I knew. I'm asking for the same. Along with more stable firmware. Vincent when is the new version coming?
- Copy Link
- Report Inappropriate Content
@mrmbman they have the "6.1 and newer" threads but it makes no sense not to bring all AP models to the same Omada version support at the same time. Pure and total chaos. Many models, even high priced premium Wi-Fi 7 models, are getting left out of most up to date support. And then slacking off on newly released Wi-Fi 6/6E models, both indoor and outdoor.
- Copy Link
- Report Inappropriate Content
@JoePalmer It seems like those particular models are somehow architecturally different than the rest of their brethren in the 700 series, they've always been kept separate and their updates seem to be far fewer and scattered than the rest of the 700 series, I have to believe there's something special about them to cause that.
I don't know if they have a different SOC or what specifically? I've never investigated it, but surely there's something significantly different.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 7005
Replies: 40
Voters 0
No one has voted for it yet.
