ER8411 l2tp

ER8411 l2tp

ER8411 l2tp
ER8411 l2tp
Yesterday
Model: ER8411  
Hardware Version: V1
Firmware Version: 1.3.2 Build 20250610 Rel.85512

Hello, I'm asking for your help, I hope I can get some advice. I need to set up a connection to the l2tp server. But judging by the logs, the tunnel is not being formed. The ER8411 is located behind the NAT, and all ports and protocols are routed to the ER8411 from the main router. I tried to update the firmware, but it didn't give any results. Write to me if additional information is required, I will send everything.

 

 

36 2026-02-21 11:57:07 IPsec NOTICE WAN/LAN4: Phase 2 of IKE negotiation succeeded. (Peers=172.16.1.2<->*.*.*.*)
37 2026-02-21 11:56:59 IPsec WARNING WAN/LAN4: Phase 1 of IKE negotiation failed. (Peers=172.16.1.2<->*.*.*.*, Error=NO_PROPOSAL_CHOSEN[14])
38 2026-02-21 11:56:59 IPsec WARNING WAN/LAN4: Phase 1 of IKE negotiation failed. (Peers=172.16.1.2<->*.*.*.*, Error=UNSUPPORTED_CRITICAL_PAYLOAD or INVALID_PAYLOAD_TYPE[1])
39 2026-02-21 11:56:59 IPsec NOTICE WAN/LAN4: IKE negotiation began in responder mode. (Mode=Main Mode, Peers=172.16.1.2<->*.*.*.*)
40 2026-02-21 11:56:59 IPsec NOTICE WAN/LAN4: IKE negotiation began in initiator mode. (Mode=Main Mode, Peers=172.16.1.2<->*.*.*.*)
41 2026-02-21 11:56:57 IPsec NOTICE WAN/LAN4: Phase 2 of IKE negotiation succeeded. (Peers=172.16.1.2<->*.*.*.*)
42 2026-02-21 11:56:49 IPsec NOTICE WAN/LAN4: Phase 2 of IKE negotiation succeeded. (Peers=172.16.1.2<->*.*.*.*)
43 2026-02-21 11:56:45 IPsec NOTICE WAN/LAN4: Phase 2 of IKE negotiation succeeded. (Peers=172.16.1.2<->*.*.*.*)
44 2026-02-21 11:56:42 IPsec NOTICE WAN/LAN4: Phase 2 of IKE negotiation succeeded. (Peers=172.16.1.2<->*.*.*.*)
45 2026-02-21 11:56:42 IPsec NOTICE WAN/LAN4: Phase 2 of IKE negotiation succeeded. (Peers=172.16.1.2<->*.*.*.*)
46 2026-02-21 11:56:41 IPsec NOTICE WAN/LAN4: Phase 1 of IKE negotiation succeeded. (Peers=172.16.1.2<->*.*.*.*)
47 2026-02-21 11:56:41 IPsec NOTICE WAN/LAN4: IKE negotiation began in responder mode. (Mode=Main Mode, Peers=172.16.1.2<->*.*.*.*)
  0      
  0      
#1
Options
2 Reply
Re:ER8411 l2tp
Yesterday

  @arthas65536 

 

Are you dialling into the ER8411 (ER8411 acting as VPN server) or is the ER8411 dialling out (its a client of some other server)

  0  
  0  
#2
Options
Re:ER8411 l2tp
Yesterday
I use the built-in l2tp server in ER8411 to connect to it from the outside. The client is Windows 10. There are no problems with pptp and openvpn running on the er 8411.
  0  
  0  
#3
Options