WiFi failed to connect on one EAP

SebastianH

Sunday - last edited Monday

Posts: 55

Helpful: 12

Solutions: 7

Stories: 0

Registered: 2023-10-26

WiFi failed to connect on one EAP

Sunday - last edited Monday

Tags: #Network Connectivity #Firmware Update #Installation

Model: EAP615-Wall

Hardware Version: V1

Firmware Version: 1.5.4

Hello.

I suddenly experience a mysterious behaviour on one of my EAP615 Wall.
My devices did't connect to it anymore. They try, but then it failes.
Multiple devices are affected.

I tried firmware downgrade to 1.5.3 and resetting and readopting.

No success. Also complete reboot and power reset of my network didn't solve the issue.

Do you have any ideas what to to?

BR
Sebastian

1 Accepted Solution

SebastianH

LV2

Monday - last edited Monday

Posts: 55

Helpful: 12

Solutions: 7

Stories: 0

Registered: 2023-10-26

Re:WiFi failed to connect on one EAP-Solution

Monday - last edited Monday

@SebastianH

I got it working again.
I had some forgotten CLI features enabled on the port:

interface gigabitEthernet 1/0/7
mac address-table max-mac-count max-number 1
mac address-table max-mac-count exceed-max-learned enable
mac address-table max-mac-count mode permanent
mac address-table max-mac-count status drop

Even there was no change in the hardware (always the same EAP connected) it causes an issue after firmware upgrade.
I removed the config and then it works again.

WiFi failed to connect on one EAP

WiFi failed to connect on one EAP

Information

Voters 0

Tags