oc200 setup
I bought an oc200 in order to configure a outdoor mesh network.
this is for personal use on an 8-acre property for surveillance & compound WiFi access.
the problem is accessing the oc200 since the ip address is in the form 192.168.0.xxx range.
it needs to be changed.
i have found no way to access it in order to change it.
any ideas?
thanks.
The OC200 will obtain an IP address from DHCP by default.
You can plug it into your network and find its IP address. Use that IP address to log in to its web interface.
Once logged in, you can configure its IP address on this page:
Settings > System Settings
Or you can give the OC200 a static IP address on your router.
The OC200 will obtain an IP address from DHCP by default.
You can plug it into your network and find its IP address. Use that IP address to log in to its web interface.
Once logged in, you can configure its IP address on this page:
Settings > System Settings
Or you can give the OC200 a static IP address on your router.