CPE510(EU) v1.1 will not connect to CPE510 v1.1
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.CPE510(EU) v1.1 will not connect to CPE510 v1.1
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.CPE510(EU) v1.1 will not connect to CPE510 v1.1
Posts: 181
Helpful: 11
Solutions: 0
Stories: 0
Registered: 2018-09-03
CPE510(EU) v1.1 will not connect to CPE510 v1.1
2017-04-06 21:27:29
Tags:
Model :
Hardware Version :
Firmware Version :
ISP :
So I just got a brand new CPE510(EU) v1.1, which will not - under any circumstances - connect to 3 older CPE510s v1.1 (one at a time in the simplest AP -> Client configuration) without the (EU) next to their name in both the sticker and the boxe's sticker description.
One thing i also found puzzling is apart from this one being sourced from Poland (the others from Germany) is that during initial setup I did not get to choose a region (neither is it evident in the wireless setup page) so I suppose it's the variant where this has been disabled in hardware since upgrading this to v.2.0.0 made no difference. Also the DFS selection is gone (using it on all others)..
Symptoms: Survey works fine, detects all the APs as one would expect, acquires channel of the AP but will not connect - it just stays there sending a few Tx frames every 5', receives nothing at all. SNR in all cases well above 30dBm so I doubt this is the culprit.
What do you suggest I do?
Hardware Version :
Firmware Version :
ISP :
So I just got a brand new CPE510(EU) v1.1, which will not - under any circumstances - connect to 3 older CPE510s v1.1 (one at a time in the simplest AP -> Client configuration) without the (EU) next to their name in both the sticker and the boxe's sticker description.
One thing i also found puzzling is apart from this one being sourced from Poland (the others from Germany) is that during initial setup I did not get to choose a region (neither is it evident in the wireless setup page) so I suppose it's the variant where this has been disabled in hardware since upgrading this to v.2.0.0 made no difference. Also the DFS selection is gone (using it on all others)..
Symptoms: Survey works fine, detects all the APs as one would expect, acquires channel of the AP but will not connect - it just stays there sending a few Tx frames every 5', receives nothing at all. SNR in all cases well above 30dBm so I doubt this is the culprit.
What do you suggest I do?
Now serving finite customer via f(x)=AirTime/∞ on the 5Ghz band :-/
#1
Options
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thread Manage
11 Reply
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-04-13
CPE510EU v1 1 will not connect to CPE510
2017-04-20 06:43:37
We have tried 2 sim cards, manually set the AT&T setting, factory reset, and re-seated the sim several times. It does not show the sim card number and it does nto connect to the network. It does not give an error either. Is there a trick to make this work? - кстати (немного не по теме) сегодня наткнулась на хороший сайт, который возвращает часть средств от покупок в интернете! Всем рекомендую
http://epngo.bz/cashback_index/130rx1
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#12
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Posts: 181
Helpful: 11
Solutions: 0
Stories: 0
Registered: 2018-09-03
Information
Helpful: 0
Views: 1591
Replies: 11
Voters 0
No one has voted for it yet.
Tags
Report Inappropriate Content
Transfer Module
New message