doubts with switch TL-SG5412F
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
doubts with switch TL-SG5412F
Model :
Hardware Version :
Firmware Version :
ISP :
good afternoon to the entire TP-Link support community.I tell you roughly the network environment I have and doubts if you could help me ...I have a Mikrotik that distributes "native" DHCP and several "VLAN" to interconnect this computer with several Unifi switches that I have in hospiutal distributed I have bought the model TL-SG5412F to interconnect the Mikrotik -> Switch -> several switch Unifi "via SFP"Well, first of all the switch is not recognizing devices in the SFP ports, and on the other hand I am giving the VLANs on the switch but I do not quite understand if they should be tagged or not.Could someone give me some light?
good afternoon to the entire TP-Link support community.I tell you roughly the network environment I have and doubts if you could help me ...I have a Mikrotik that distributes "native" DHCP and several "VLAN" to interconnect this computer with several Unifi switches that I have in hospiutal distributed I have bought the model TL-SG5412F to interconnect the Mikrotik -> Switch -> several switch Unifi "via SFP"Well, first of all the switch is not recognizing devices in the SFP ports, and on the other hand I am giving the VLANs on the switch but I do not quite understand if they should be tagged or not.Could someone give me some light?
Hardware Version :
Firmware Version :
ISP :
good afternoon to the entire TP-Link support community.I tell you roughly the network environment I have and doubts if you could help me ...I have a Mikrotik that distributes "native" DHCP and several "VLAN" to interconnect this computer with several Unifi switches that I have in hospiutal distributed I have bought the model TL-SG5412F to interconnect the Mikrotik -> Switch -> several switch Unifi "via SFP"Well, first of all the switch is not recognizing devices in the SFP ports, and on the other hand I am giving the VLANs on the switch but I do not quite understand if they should be tagged or not.Could someone give me some light?
good afternoon to the entire TP-Link support community.I tell you roughly the network environment I have and doubts if you could help me ...I have a Mikrotik that distributes "native" DHCP and several "VLAN" to interconnect this computer with several Unifi switches that I have in hospiutal distributed I have bought the model TL-SG5412F to interconnect the Mikrotik -> Switch -> several switch Unifi "via SFP"Well, first of all the switch is not recognizing devices in the SFP ports, and on the other hand I am giving the VLANs on the switch but I do not quite understand if they should be tagged or not.Could someone give me some light?
