EAP245, same SSID for 2.4 and 5.0 GHz radio?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP245, same SSID for 2.4 and 5.0 GHz radio?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP245, same SSID for 2.4 and 5.0 GHz radio?
EAP245, same SSID for 2.4 and 5.0 GHz radio?
2017-11-09 14:39:59
Model :

Hardware Version :

Firmware Version :

ISP :

EAP245, same SSID for 2.4 and 5.0 GHz radio? What are best? My home wifi network has 2 ipads, 2 iphone, Samsung TV (Netflix) 2 SQ-box and one laptop. I read about band steering but I dont find the function in the web interface controller? Any advice or tips?
/Lennart
  0      
  0      
#1
Options
2 Reply
Re:EAP245, same SSID for 2.4 and 5.0 GHz radio?
2017-11-09 19:30:10
To configure band steering on the EAP245 you need to run the EAP Controller. I'm not sure wether band-steering is turned on automatically with default settings in standalone-mode, but I'm sure that you need the EAP Controller to fiddle with its settings. However, band-steering makes sense only if you expect more than, say, 20 to 40 simultaneous users of your AP. For a home network with a few clients only band-steering does not make any sense. You could configure the multi-media devices to always use the 5 GHz band, which makes more sense in order to use the faster bandwidth available in the 5 GHz band.

One SSID for both frequency band is possible (even w/o band steering) and mandatory for band steering.
༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options
Re:EAP245, same SSID for 2.4 and 5.0 GHz radio?
2017-11-10 13:59:57
Thanks R1D2 for your advice and tips!
BR, Lennart
  0  
  0  
#3
Options