Hi Mark,

Do you mean you manage the EAP in standalone mode, but all the clients can connect to 2.4G only? Here are some suggestions you can try.

1. Upgrade the firmware to the latest version. What's the version of your firmware? We recommend you to upgrade the firmware to the latest version.

2. Enable 5GHz wireless radio. Please make sure that you enable the 5GHz wireless radio, or the EAP will not broadcast the SSID, and your clients will not see the SSID.

3. Create anoter SSID to have a try. May be there is something wrong when you config the SSID, so just create another SSID again and to see if the problem still exists.

hello,

many thanks for the reply.

I have installes the EAP in standalone just right.

I have enable the 5 ghz, same way as the 2,4. Eveything is right enabled.

i will check the firmware and test with an new SSID en let it now.

Thanks

Mark