TL-SG108E Multiple VLAN help
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-SG108E Multiple VLAN help
Model :
Hardware Version :
Firmware Version :
ISP :
Hello, my name is Tomberg.
I'm currently developing a prototype box that uses the TL-SG108E switch, that is a little hard to explain, I'll start with what each port has:
1 = gateway router for internet connection
2 = other switch for users
3 = ADMIN port
4 = Pi1 (Virtual Router)
5 = Pi2
6 = Pi3
7 = Pi4
8 = Pi5
So I have Port 1, connecting to Port 4. I call that Vlan101. In working order, it gives my virtual router access to the internet, and allows distribution to my semi-DMZ areas. This having IP Addresss 192.168.0.3
Then I have Port 4, connecting to Ports 2,5-8. This giving the Pi's, and the user's supplied, and semi-controlled internet under new IP Address 10.0.3.1/26
Then I need Port 3 and 4 to connect for a secure ADMIN Port for my vRouter, and its privatized web server.
I have tried setting:
VLAN101 = 1,4
VLAN102 = 2,4-8
VLAN103 = 3,4
But I've gotten no use, and I feel I'm not getting the hang of this. I can set PVID to certain ports, but how do I set multiple VLANS on the same port? I kind of need it for that Port 4. If anyone has a working setting for this switch to allow this, I would appreciate it. This has kept me up for the past few nights.
Hardware Version :
Firmware Version :
ISP :
Hello, my name is Tomberg.
I'm currently developing a prototype box that uses the TL-SG108E switch, that is a little hard to explain, I'll start with what each port has:
1 = gateway router for internet connection
2 = other switch for users
3 = ADMIN port
4 = Pi1 (Virtual Router)
5 = Pi2
6 = Pi3
7 = Pi4
8 = Pi5
So I have Port 1, connecting to Port 4. I call that Vlan101. In working order, it gives my virtual router access to the internet, and allows distribution to my semi-DMZ areas. This having IP Addresss 192.168.0.3
Then I have Port 4, connecting to Ports 2,5-8. This giving the Pi's, and the user's supplied, and semi-controlled internet under new IP Address 10.0.3.1/26
Then I need Port 3 and 4 to connect for a secure ADMIN Port for my vRouter, and its privatized web server.
I have tried setting:
VLAN101 = 1,4
VLAN102 = 2,4-8
VLAN103 = 3,4
But I've gotten no use, and I feel I'm not getting the hang of this. I can set PVID to certain ports, but how do I set multiple VLANS on the same port? I kind of need it for that Port 4. If anyone has a working setting for this switch to allow this, I would appreciate it. This has kept me up for the past few nights.
