TP-LINK T1700X-16TS 10G Smart Switch won't link on SFP+

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP-LINK T1700X-16TS 10G Smart Switch won't link on SFP+

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-LINK T1700X-16TS 10G Smart Switch won't link on SFP+
TP-LINK T1700X-16TS 10G Smart Switch won't link on SFP+
2019-04-10 06:50:04
Model: T1700X-16TS  
Hardware Version: V1
Firmware Version: 1

Hello.

 

I had a problem with the SFP+ ports. I thought I had hardware compatibility issues with 10Gb modules between the switch and the 10Bg Mellanox network card.

 

In the end the problem came from the fact that the T1700X-16T could not do the auto negotiation for the fiber speed. The speed must be set to 10Gb as shown in the screenshot.

 

If it can help other people, so much the better:-)

  0      
  0      
#1
Options
1 Reply
Re:TP-LINK T1700X-16TS 10G Smart Switch won't link on SFP+
2019-04-12 01:36:25

Titi2019 wrote

Hello.

 

I had a problem with the SFP+ ports. I thought I had hardware compatibility issues with 10Gb modules between the switch and the 10Bg Mellanox network card.

 

In the end the problem came from the fact that the T1700X-16T could not do the auto negotiation for the fiber speed. The speed must be set to 10Gb as shown in the screenshot.

 

If it can help other people, so much the better:-)

 

Hi Titi2019

 

If T1700X-16TS cannot change to auto speed, you can try to set Mellanox network card as 10G forced speed and full duplex as well.

  0  
  0  
#2
Options