TL-SG1016PE "The amount of VLAN is full!"
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
So, I use a lost of TP-Link switches when I install wireless antennas, but this is the first time I actually need more than 32 VLANS.
I did as usual, I enabled the 802.11Q VLAN and started creating me VLANs, after adding 31 (so 32 total with the default management VLAN1) the webpage gave me the following pop-up after trying to same my 33rd "The amount of VLAN is full!".
The datasheet of the switch states the following:
| VLAN | Supports up to 128 VLANs simultaneously (out of 4K VLAN IDs) MTU/Port/Tag VLAN |
|---|
So I tried installing the lastest firmware --> same issue
I tried removing port members to a few VLANs so there would not be more than 32 VLAN per port --> same issue
Tried using an other browser --> same issue
Tried using the software to configure the switch --> same issue
Tried rebooting the switch --> same issue
I tried contacting TP-Link support line and now I am wanting for a call back from a network engineering.
So now I am posting this here, looking for anyone's help
