Business Community > All Threads > T2600G-28TS dhcp server relay
< All Threads

T2600G-28TS dhcp server relay

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

T2600G-28TS dhcp server relay

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
T2600G-28TS dhcp server relay
T2600G-28TS dhcp server relay
2019-07-09 13:43:17 - last edited 2019-07-09 20:37:56
Model: T2600G-28TS(TL-SG3424)  
Hardware Version: V3
Firmware Version: 180201

Hi, I'm a new user here,

I have a managed switch T2600G-28TS, and i must create 4 VLAN and, if possbile, i woudk like to use one (1) DCHP server and configure a DHCP server relay for each VLAN.

I follow this example:

https://www.tp-link.com/us/support/faq/2221/

but when I try to set the routed port, I have an error: The IP address conflicts with an existing one.

I have created 4 VLAN : 10, 20, 30 , 40.

Then i have assigned a specific port: VLAN-10: port  10 to 12, VLAN-20: port  13 to 16, VLAN-30: port  17 to 20, VLAN-40: port  21 to 24.

For each VLAN I have defined interface, for exmpale: VLAN-10  Inteface IP 192.168.10.1

 

Then I configured static rout for each VLAN (exmpale vlan 10)

 

Next step:

L3 FEATURES > DHCP Service > DHCP Server > DHCP Server: ENABLE

L3 FEATURES > DHCP Service > DHCP Server > Pool Setting : for VLAN-10....

then: L3 FEATURES > DHCP Service > DHCP Relay > DHCP Interface Relay 

and set for each VALN the IP of the DHCP SERVER, in my case ip is 192.168.0.111 and this is IP of my MODEM ADSL.

In the configuration of modem ADSL I haven't changed anything.

 

 

WHen I connect a PC on a port of VLAN 10, the system relase correctly IP and gateway (IP: 192.168.10.2, gateway: 192.168.10.1, DNS:8.8.8.8) but is not possible to navigate in internet, no ping out the subnet....

Where I wrong?

thank you.

  0      
 
  0      
 
#1
Options
7 Reply
Re:T2600G-28TS dhcp server relay
2019-07-10 14:34:14

It would so much easier to understand, if you put text cfg instead of pics.

Well, DHCP Relay is needed, when your DHCP-server exists in the same VLAN as a client, but in different subnet. 

When your DHCP-Server is in another VLAN, you must configure DHCP VLAN Relay.

 

Let us understand, why you want to have several VLANs. Maybe, it will be enough for you to configure only port isolation? I do not understand for now, why you need VLANs.

 

Otherwise, if you really want to have VLAN10, then you need to configure vlan interface, as you did for VLAN10, configure VLAN interface for VLAN1, which goes your ADSL Modem, configure static routes for modem and back.

 

  0  
  0  
#2
Options
Re:Re:T2600G-28TS dhcp server relay
2019-07-10 14:50:04

thank you.,

I need to isolation the offices because the people that use the offices are members of different companies. I have 5 office, and I need to create a specific LAN for each office where the modem for internet is shared.

If possible I prefer to create 5 LAN with different class of Ip. (192.168.10.X ..... 192.168.20.X, .... 192.168.50.X)

The PC, printer, NAS must be isolated from office to office.

For example:

PC, NAS and printer of office A must be uses shared modem but cannot view the pc and other peripherical of other offices

 

 

  0  
  0  
#3
Options
Re:Re:Re:T2600G-28TS dhcp server relay
2019-07-10 14:55:31

What's your router? I think it's easier to configure it there.

  0  
  0  
#4
Options
Re:T2600G-28TS dhcp server relay
2019-07-10 14:57:57

I have started from this scheme and the related example....

  0  
  0  
#5
Options
Re:Re:Re:Re:T2600G-28TS dhcp server relay
2019-07-10 14:58:49 - last edited 2019-07-10 14:59:46

Zyxel USG60 firewall with 2 wan port and 3 lan port

 

USG60 is also DHCP server for my network

  0  
  0  
#6
Options
Re:Re:Re:Re:Re:T2600G-28TS dhcp server relay
2019-07-10 15:04:10
As I know, usg60 supports everything you need. You can configure trunk port from your switch to your router. Configure several IP-interfaces on router, configure several DHCP-Servers there.
  0  
  0  
#7
Options
Re:Re:Re:Re:Re:Re:T2600G-28TS dhcp server relay
2019-07-10 15:12:11
Thank you, I will try this way.
  0  
  0  
#8
Options

Information

Helpful: 0

Views: 2812

Replies: 7

Related Articles
DHCP relay on T2600G-28TS v2
934 0
T2600G-28TS Time Range and ACL
3953 0
T2600G-28TS - Port Status LED
621 0
cannot access console through https for T2600G-28TS
608 0
T2600G-28TS: How to setup DMZ with VLAN and ACL
7676 0
How do I upgrade T2600G-28TS?
1190 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.