Business Community > All Threads > TL-ER5120 / Load balancing problem
< All Threads

TL-ER5120 / Load balancing problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-ER5120 / Load balancing problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-ER5120 / Load balancing problem
TL-ER5120 / Load balancing problem
2019-07-18 09:47:55 - last edited 2021-04-18 10:35:38
Model: TL-ER5120  
Hardware Version: V4
Firmware Version: 4.0.1 Build 20180706 Rel.58151

Hi,

 

I've just finish setting up my router but I've might have done something wrong 'cause it is not working like I would...

I hope that somebody could help me with this...

 

Here is my setup and what I would like to do :

 

- I've two ISP routers wired to the TL-ER5120, the first one to WAN1 and the second one to WAN2

- The first ISP router have a (real) 600kbps bandwith and the second ISP router have a (real) 1500kbps bandwith

- Both are working fine independently because when I disconnect WAN1, I can check the speed and see that this is WAN2 working and vice versa

 

The thing is when both are connected, it seems that I only got the bandwith of WAN1 because I can't get the speed over 600kpbs...

And I would like to combine the bandwith of the two ISPs

 

Any help please ? Thanks.

Here are the screen captures of the menus

 

 

  0      
 
  0      
 
#1
Options
3 Reply
Re:TL-ER5120 / Load balancing problem
2019-07-19 09:35:11 - last edited 2021-04-18 10:35:38

Generally one session will go thorugh only one WAN. It means that when you test the speed, if only one server is connected to your client, then all data will go though only one WAN. So you only get the speed of one WAN.

 

If you need to see the speed over 600kbps, you can try to use P2P download (it means that download the file from multiple servers at the same time). And try to disable application optimized routing.

  1  
  1  
#2
Options
Re:Re:TL-ER5120 / Load balancing problem
2019-07-19 13:42:45 - last edited 2021-04-18 10:35:38
Hi, Thanks Andone for your answer. OK, I thought that the speed will be added up for all types of downloads or web surfing. Too bad... I disabled "Application Optimized Routing" and just tried to download an Ubuntu release via BiTorrent and the speed get over the 600kbps of Wan 1 so it seems to work.
  0  
  0  
#3
Options
Re:TL-ER5120 / Load balancing problem
2020-11-30 16:29:18 - last edited 2021-04-18 10:35:38

@Guill73 hola no se si ya lo lograste pero si se puede sumar el ancho de banda, te esplico, el ancho de banda no se suma en una conexion si abres una pagina no se va sumar solo saldra por 1 wan, pero si descargas 2 o mas archivos a la vez si sumara el ancho de banda y asi un archivo de descarga por la wan 1 y otro por la wan 2, si quieres contactame y te digo como es la configuracion.

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 2167

Replies: 3

Related Articles
Can the TL-ER5120 V4 load balancing router support EAP SSID to VLAN mapping ?
1742 0
TL-ER5120 Load Balancing
1684 0
How to set up a TL-ER5120 Router before a Deco M4 mesh network to have load balancing
831 0
TL - ER5120 Load Balancer Outbound IP
578 0
How to remotely access load balancer TL-ER5120
617 0
Problem with Load Balancing with ER7206 V1
1289 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.