Business Community > All Threads > can't execute autobackup because autobackup schedule time was expired
< All Threads

can't execute autobackup because autobackup schedule time was expired

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

can't execute autobackup because autobackup schedule time was expired

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
can't execute autobackup because autobackup schedule time was expired
can't execute autobackup because autobackup schedule time was expired
2020-07-21 11:41:07

Omada SDN Controller 4.1.5

 

When I switch on Autobackup when time zone set to Europe/Amsterdam it say in the logfile:
2020-07-21 13:33:00 [ThreadPoolTaskScheduler-2] [WARN]-[SourceFile:95] - can't execute autobackup because autobackup schedule time was expired
2020-07-21 13:33:00 [ThreadPoolTaskScheduler-2] [INFO]-[SourceFile:96] - timeNextExpect timestamp: 1595334780000, now timestamp: 1595331180028.

 

I have set OS to Etc/UTC and also Europe/Amsterdam. It doesnt make a difference. 

I think problem is simular as reported on OC200 1.7.0.

 

Timezone is not in Summertime in application while it is on OS.

 

In autoback menu I see: (UTC+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna

 

  0      
 
  0      
 
#1
Options
12 Reply
Re: can't execute autobackup because autobackup schedule time was expired
2020-07-21 12:00:44

Hi Ronald1965, it's a known bug, already reported to TP-Link.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options
Re: can't execute autobackup because autobackup schedule time was expired
2020-07-21 13:36:41

@R1D2 you can by the bypass it by setting Controller timezone to UTC and Site configuration timezone to UTC.   I don't think the OS timezone has any influence

  0  
  0  
#3
Options
Re: can't execute autobackup because autobackup schedule time was expired
2020-07-21 13:49:58 - last edited 2020-07-21 13:56:00

@Ronald1965, you mean setting it to a zone one hour ahead – it's Daylight Savings Time (+1h).

UTC is one hour in the past  (Greenwhich Mean Time, that's near London) relative to my location.

 

Internally Omada Controller always uses UTC, that's why it needs a setting to know the local timezone as well as the DST rules.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#4
Options
Re: can't execute autobackup because autobackup schedule time was expired
2020-07-21 14:59:39

@Ronald1965 Thank you, that work. UTC on controller and +2 on site, work on OC200 and Windows install.

 

 

  0  
  0  
#5
Options
Re: can't execute autobackup because autobackup schedule time was expired
2020-08-06 18:56:44

@Ronald1965 

 

oke, the autobackup is working now but I can't find an option to restore the backup file as described under 5.3.3 in the user manual “1910012850-Omada SDN Controller User Guide”.

  0  
  0  
#6
Options
Re: can't execute autobackup because autobackup schedule time was expired
2020-08-06 22:43:53 - last edited 2020-08-06 22:44:23

@TQJ5300, 5.3.3 describes a restore of a previously backed up file which you did save externally on your PC.

 

To restore an auto-backup use the »Action« control on the right of the backup to restore in the listing of all auto-backups:

 

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#7
Options
Re: can't execute autobackup because autobackup schedule time was expired
2020-08-07 06:41:27

@R1D2 

 

Thanks I had not seen this (not visible on small screen).  This is also not described anywhere in the user manual “Omada SDN Controller User Guide”

  0  
  0  
#8
Options
Re: can't execute autobackup because autobackup schedule time was expired
2020-08-07 08:14:10 - last edited 2020-08-07 08:14:29

@TQJ5300, that's right.

 

Dear @Fae, please can you inform the documentation team to add a description of the »Restore« funtion for auto-backups to the Omada SDN Controller User's Guide? Thanks in advance!

 

And layout of the SDN web UI could be changed to allow the browser to size the table cells, so it will work on small screens (e.g. 13" screens) again. I did already file this feature request and it seems that more customers use small screens.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#9
Options
Re: can't execute autobackup because autobackup schedule time was expired
2020-08-08 04:27:48

Dear R1D2, welcome, thank you for the valued suggestion.

 

I've written it down and added this to the suggestion list. The documentation team will check it. Best Regards!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#10
Options
Re: can't execute autobackup because autobackup schedule time was expired
2020-08-16 08:25:29

@R1D2 

 

Thanks for the support.

 

 I am new on this forum and have new issues for the controller software version 1.4.5 but I am not sure how to handle this (can I handle this together or do I have to split this up per issue)

 

 1. Map EAP implantation gives error message with parameters:

 

 

 With version 1.2.3 this worked fine.  Furthermore, there is also no coverage map for the EAPs as in version 1.2.3

 

 2. Printout of the portal vouchers with 2 vouchers next to each other (previously this was 4), which equates to half the number of vouchers per sheet:

 

Version 1.4.7

 

 

 

Vesion 1.2.3

 

 

 

 3. In the Omada app nothing is provided for the portal, but it was probably the same with the previous version.

 

Kind regards

 

  0  
  0  
#11
Options
12

Information

Helpful: 0

Views: 2667

Replies: 12

Related Articles
[Failed]Auto Backup failed to execute with generating file autobackup
373 0
AutoBackup on OC200 controller not enabled
1482 0
Omada SDN 4.1.5 not able to autobackup
1095 0
Cannot find Autobackup or Manual Backup for Settings
503 0
Why is it impossible to make autobackup without PoE on a OC200?
985 0
Can't use auto backup feature with SFTP
639 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.