Multiple eap225 and SSID

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Multiple eap225 and SSID

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Multiple eap225 and SSID
Multiple eap225 and SSID
2020-09-21 05:38:18
Model: EAP225-Outdoor  
Hardware Version: V1
Firmware Version:

I have 4 nos. of eap225 outdoor with different SSID on each devices installed in different places within our area. All eaps are connected in one controller and the portal (for voucher purpose)is enabled for all the devices and works very well. But my only concern is when im connected to SSID1 using voucher, if im going to another area and want to connect to SSID2, its asking again for another voucher. How to setup using one voucher that can connect to all SSID or devices. 

Thank you in advance....

  0      
  0      
#1
Options
10 Reply
Re:Multiple eap225 and SSID
2020-09-21 20:26:22

You have to keep all of your 4 EAPs in the same site in the controller. Then you will be able to roam between your EAPs with your devices.

  1  
  1  
#2
Options
Re:Multiple eap225 and SSID
2020-09-22 09:32:24

 

eurilex wrote

How to setup using one voucher that can connect to all SSID or devices.

 

You need to bind the same portal to all different SSIDs. Just select SSID1 and SSID2 etc. in the SSID field of the portal:

 

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  1  
  1  
#3
Options
Re:Multiple eap225 and SSID
2020-09-23 09:49:07
Its already binded in the same portal but still the same issue. If im connected to SSID1 using the voucher then trying to go and connecting to SSID2, the login page is displayed and need to input another voucher in able to connect. Im expecting that it will be connected using a voucher since the SSIDs are binded in one portal but what happenned is it needs another voucher to connect to another SSID
  0  
  0  
#4
Options
Re:Multiple eap225 and SSID
2020-09-23 13:21:27

@eurilex, I think it could be a bug. Maybe @Fae could comment further on this behavior (thanks!)?

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#5
Options
Re:Multiple eap225 and SSID
2020-09-24 09:31:23

@R1D2 

 

R1D2 wrote

@eurilex, I think it could be a bug. Maybe @Fae could comment further on this behavior (thanks!)?

 

Sorry I don't think it is a bug. As far as I'm concerned, it's normal that it is required to input another voucher code to connect when switching to another SSID. It's the same on the SSIDs which are secured with the same WPA password, when switching from SSID1 to SSID2, we still need to input the WPA password to connect even if the password is the same. Maybe I'm wrong, have you met such a product that can share one voucher code between different SSIDs from different APs? If yes, may I ask what application scenario is it used for?

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#6
Options
Re:Multiple eap225 and SSID
2020-09-24 09:34:00

@eurilex 

 

But my only concern is when im connected to SSID1 using voucher, if im going to another area and want to connect to SSID2, its asking again for another voucher. How to setup using one voucher that can connect to all SSID or devices. 

 

 

May I know your application scenario? Why don't you use the same SSID for it?

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#7
Options
Re:Multiple eap225 and SSID
2020-09-24 09:55:28

@Fae, thanks for your reply.

 

I just was guessing b/c two or more SSIDs can be bound to the same portal, so I was under the impression that this portal is shared between SSIDs. Back in times when we did have user authentication with vouchers or self-registration in our portal software, we had common name spaces for portals, that means a voucher or self-registration of users was valid for all hotspots in the same name space even at different locations and independent of the SSIDs used by those hotspots.

 

However, vouchers and self-registration is seldom used in our country since the last amendment of the Telemedia Law in 2017, so most WLAN hotspots here use a No Authentication scheme nowadays.

 

You're right, if the voucher function is bound to a single SSID in Omada Controller intentionally, @eurilex should use the same SSID for all EAPs which should share vouchers.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#8
Options
Re:Multiple eap225 and SSID
2020-09-25 13:01:35

I'm not understanding why the OP isn't using the same SSID on all 4 AP's.  AP's can have multiple SSID's.  Just have one SSID e.g. "voucher" configured on all of the AP's for which you want voucher clients to be able to roam.  Likewise, the AP/SSID VLAN for said SSID needs to be able to access the controller if they are on separate networks/subnets/VLAN's.

  0  
  0  
#9
Options
Re:Multiple eap225 and SSID
2020-09-25 16:16:35 - last edited 2020-09-25 16:20:38

@JSchnee21, anyway, I would like to know what's the intended purpose of being able to bind one portal to different SSIDs if the portal's authentication then is handled separately for each SSID, if only just to learn what can be done when a customer demands it for whatever reason. For me as a developer software should offer a mechanism, but not imply a certain policy (a basic UNIX/Linux philosophy often neglected).

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#10
Options
Re:Multiple eap225 and SSID
2020-09-26 08:22:35

Q.E.D.: It didn't take long for another TP-Link customer to request that a portal with voucher authentication be split over two separate SSIDs:

https://community.tp-link.com/en/business/forum/topic/228982

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#11
Options