Use 2 wirelessly MESH'd EAP225 APs to connect a switch to a router over the wireless connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Use 2 wirelessly MESH'd EAP225 APs to connect a switch to a router over the wireless connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Use 2 wirelessly MESH'd EAP225 APs to connect a switch to a router over the wireless connection
Use 2 wirelessly MESH'd EAP225 APs to connect a switch to a router over the wireless connection
2020-10-01 05:54:08 - last edited 2020-10-04 07:31:39
Model: EAP225-Outdoor  
Hardware Version:
Firmware Version:

Hello All,

I have used the EAP225-outdoor APs to create MESH'd networks to extend the wifi reach of the wired APs and this has always worked well.

 

I have never tried to connect a switch to one of the wirelessly connected (MESH'd) APs to connect devices wired to that switch to the network.

 

To lay this out in detail, I have a use case where I need to connect non-wifi enabled devices (printers and such) to a network where there is no practical way to run wire from a switch for those devices back to the router. I can, however, connect an EAP225 AP to the router and then install a second EAP225 AP at the location of the non-wifi enabled devices connected wirelessly to the first AP to provide a wifi connection through the wirelessly connected AP to the router.

 

The question is, if I connect a switch to the 2nd (wirelessly connected) AP, will devices connected to that switch be able to connect to the router via the wireless connection between the 2 APs?

 

Thanks for any help!

  0      
  0      
#1
Options
1 Accepted Solution
Re:Use 2 wirelessly MESH'd EAP225 APs to connect a switch to a router over the wireless connection-Solution
2020-10-01 09:09:26 - last edited 2020-10-04 07:31:39

 

CBC wrote

The question is, if I connect a switch to the 2nd (wirelessly connected) AP, will devices connected to that switch be able to connect to the router via the wireless connection between the 2 APs?

 

 

Yes, devices connected to the switch can also reach to the router.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Use 2 wirelessly MESH'd EAP225 APs to connect a switch to a router over the wireless connection-Solution
2020-10-01 09:09:26 - last edited 2020-10-04 07:31:39

 

CBC wrote

The question is, if I connect a switch to the 2nd (wirelessly connected) AP, will devices connected to that switch be able to connect to the router via the wireless connection between the 2 APs?

 

 

Yes, devices connected to the switch can also reach to the router.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 1829

Replies: 1

Related Articles