CPE710 - How is "Feed only mode" used?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
My question is actually related to the CPE710 but the model is unavailable from the drop-down menu.
I read from the CPE710 Installation guide (https://static.tp-link.com/2020/202001/20200119/7106508556-CPE605CPE710_IG.pdf) that "The CPE device without the reflector installed provides outdoor -to-indoor Wi-Fi coverage with the Feed only mode". Is this mode used when confiiguring the device as AP Client Router (WISP Client)? Could you please explain uses of the feed only mode?
Thank you.
Dear @wilsonperez,
Thank you for the feedback, the CPE710 model is available from the drop-down menu now.
The Feed Only mode is meant to work with a low Antenna gain, making the CPE710 feed the wireless signal at the backside with larger coverage, in this case, you don't install the reflector on the CPE710. As indicated in the picture below, it could be suitable for the application scenario of providing outdoor-to-indoor WiFi coverage.
To get into the Feed-Only mode, we need to set the Antenna to Feed-Only under wireless basic settings.
