single site, 2 ISPs: how can I set one as backup?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
I am setting up a LAN via mesh between a house and another using 2 EAP225-Outdoors. The houses are about 70m apart, and each has their own ISP. If I understand correctly, I would need a multi-WAN router (eg. TL-R600VPN) to utilize both ISPs on the same LAN. Is this assumption correct? And how can I set up such when both houses can only be connected wirelessly via mesh?
Regards.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Dear @Doods,
I am setting up a LAN via mesh between a house and another using 2 EAP225-Outdoors. The houses are about 70m apart, and each has their own ISP. If I understand correctly, I would need a multi-WAN router (eg. TL-R600VPN) to utilize both ISPs on the same LAN. Is this assumption correct? And how can I set up such when both houses can only be connected wirelessly via mesh?
If you want to utilize both ISPs in one house, the setup could be like the following:
ISP1 network ----- 1st EAP225-Outdoor ))))EAP Mesh(((( 2nd EAP225-Outdoor ------WAN2-
House 1 TL-R600VPN at House 2 (LAN)----devices
ISP2 network-------WAN1-
To set up the EAP mesh network, what you need is the following:
- Install the Omada Software Controller on a Windows/Linux OS or purchase OC200 to configure the Mesh.
- One of the EAPs should be hardwired to one available network via Ethernet cable
- It is required to keep the Omada Controller running to use the EAP Mesh network.
You may also read the FAQ about the EAP Mesh network for more details, https://www.tp-link.com/support/faq/2283/
- Copy Link
- Report Inappropriate Content
Dear @Doods,
I am setting up a LAN via mesh between a house and another using 2 EAP225-Outdoors. The houses are about 70m apart, and each has their own ISP. If I understand correctly, I would need a multi-WAN router (eg. TL-R600VPN) to utilize both ISPs on the same LAN. Is this assumption correct? And how can I set up such when both houses can only be connected wirelessly via mesh?
If you want to utilize both ISPs in one house, the setup could be like the following:
ISP1 network ----- 1st EAP225-Outdoor ))))EAP Mesh(((( 2nd EAP225-Outdoor ------WAN2-
House 1 TL-R600VPN at House 2 (LAN)----devices
ISP2 network-------WAN1-
To set up the EAP mesh network, what you need is the following:
- Install the Omada Software Controller on a Windows/Linux OS or purchase OC200 to configure the Mesh.
- One of the EAPs should be hardwired to one available network via Ethernet cable
- It is required to keep the Omada Controller running to use the EAP Mesh network.
You may also read the FAQ about the EAP Mesh network for more details, https://www.tp-link.com/support/faq/2283/
- Copy Link
- Report Inappropriate Content
Great! This looks simple and doable enough. My follow up question is, if this is scalable? Say, I have a 3rd house with its own ISP and EAP225-Outdoor joining the mesh. How can I make WAN3 when House2's EAP225-Outdoor is already occupied? Will it need another one in House2?
Regards.
Update:
So, I was finally able to finally set up the network above.
Some realizations I got:
- Devices behind the WAN2 will not benefit from the aggregation of the multi-WAN router.
- I would need separate wireless connection (probably need to use CPEs) between the houses to provide downlink directly from ISP1 to the multiWAN router.
- I am not able to ping devices from WAN2 to either WAN1 or LAN. I've read it has something to do with static routes which I hope someone could assist with.
Nevertheless, thanks.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 547
Replies: 2
Voters 0
No one has voted for it yet.