Business Community > All Threads > TL-R470T+ setup external IP range
< All Threads

TL-R470T+ setup external IP range

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-R470T+ setup external IP range

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-R470T+ setup external IP range
TL-R470T+ setup external IP range
2020-12-28 15:21:26 - last edited 2021-04-18 10:20:58
Model: TL-R470T+  
Hardware Version: V4
Firmware Version: 1.1.0 Build 20150526 Rel.71817s

Hi guys!

 

I use TL-R470T+ with four external connections, one of that have a static IP range from 200.44.201.44 to 200.44.201.49, the subnet mask is 255.255.255.248 and gateway is 200.44.201.43.

 

When I setup static IP settings I can select only one of that related IP's as example 200.44.201.44.

 

With this setup, I can't access another external IP's 200.44.201.45 to 200.44.201.49.

 

How I can setup external fixed IP with multiple sources?

 

I've tried add external IP scope but the router says it's not a valid config.

 

This router can't manage scope of external IP address?

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:TL-R470T+ setup external IP range-Solution
2020-12-29 08:54:33 - last edited 2021-04-18 10:20:58

Dear @EtaLasquera,

 

I use TL-R470T+ with four external connections, one of that have a static IP range from 200.44.201.44 to 200.44.201.49, the subnet mask is 255.255.255.248 and gateway is 200.44.201.43.

 

Are you trying to configure One-to-One NAT to create a one-to-one mapping between a valid public IP address and a private IP address of a localhost?

 

The TL-R470T+ V4 doesn't support One-to-One NAT, and it only works as a NAPT device.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#2
Options
3 Reply
Re:TL-R470T+ setup external IP range-Solution
2020-12-29 08:54:33 - last edited 2021-04-18 10:20:58

Dear @EtaLasquera,

 

I use TL-R470T+ with four external connections, one of that have a static IP range from 200.44.201.44 to 200.44.201.49, the subnet mask is 255.255.255.248 and gateway is 200.44.201.43.

 

Are you trying to configure One-to-One NAT to create a one-to-one mapping between a valid public IP address and a private IP address of a localhost?

 

The TL-R470T+ V4 doesn't support One-to-One NAT, and it only works as a NAPT device.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  1  
  1  
#2
Options
Re:TL-R470T+ setup external IP range
2020-12-29 11:43:27 - last edited 2021-04-18 10:20:58
Thank you for assistance, I'll buy a new router. Best regards, have a happy new year.
  0  
  0  
#3
Options
Re:TL-R470T+ setup external IP range
2020-12-30 07:42:01 - last edited 2021-04-18 10:20:58

Dear @EtaLasquera,

 

Thank you for assistance, I'll buy a new router. Best regards, have a happy new year.

 

You are most welcome and Happy New Year~

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 861

Replies: 3

Related Articles
TL-R470T+
302 0
TL-R470T+
764 0
R470T+ IP statistics
819 0
TL-R470T+ V6 PPPoE static IP not possible
1524 0
TL-R470T router failover return to primary if it is up
207 0
TL-R470T+ Static Route setup - next hop question
2000 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.