How to get Multi SSID work to a different physical LAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to get Multi SSID work to a different physical LAN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to get Multi SSID work to a different physical LAN
How to get Multi SSID work to a different physical LAN
2021-01-20 21:32:40
Hardware Version: V5
Firmware Version:

That's what i have

 

 WAN / Internet
            |
            |
            |
        WAN | static IP from ISPl
            |
      .-----+-----------+-----------+-----------+-----------+----------.
      |  OPNsense  (Hardware Firewall) 3x physical-LAN |
      '-----+-----------+-----------+-----------+-----------+----------'
            |                                              |
        LAN | 192.168.0.1/24              GUESTNET with Captive Portal 10.0.1.1 /24
            |                                              | VLAN SUBNET without Captive Portal 10.0.10.1 /24
      .-----+-----------+-----------+-----------+-----------+------.
      | LAN-Switch Managed / Netgear JGS524E|       | VLAN Port based
      '-----+-----------+-----------+-----------+-----------+------'
            |                                                             |
    ...-----+------... (Clients/Printer/AP's)     ...-----+------...(AP's -> Clients)

                          (192.168.0.1/24       )                          (10.0.1.1/24      )

 

I have this structure running.

And it works.

In the GUESTNET the EAPs working with the SSID GUESTNET and DHCP from 10.0.1.1/24. User forwarded to a login Page on the opnsense firewall to get access.

In the LAN also some EAPs to get access to the internal LAN.

 

What i want to do is, to set another SSID to the EAPs with the 192.168.0.1 so that i can get access to the LAN through the GUESTNET.

I find how to set another SSID and set it to a different VLAN but i didn't get it work on my switch.

Some trouble with the VLAN ID and PVID settings.

I think i need to change to the TL-SL2428P for more settings or is here any one to explain me how to do it.

 

OMADA Controller is Software, all EAPs newest firmware.

 

 

 

 

  0      
  0      
#1
Options
2 Reply
Re:How to get Multi SSID work to a different physical LAN
2021-01-29 09:52:33

Dear @NausB,

 

I find how to set another SSID and set it to a different VLAN but i didn't get it work on my switch.

Some trouble with the VLAN ID and PVID settings.

I think i need to change to the TL-SL2428P for more settings or is here any one to explain me how to do it.

 

The switch port connected with the EAP and the ports between the switch and the router should be tagged with the corresponding VLAN.

For example, Router---(P1)switch(P2)--EAP)))(((SSID with VLAN100, then P1 and P2, as well as the router port, should tag VLAN100.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:How to get Multi SSID work to a different physical LAN
2021-01-29 10:42:10

@Fae 

thank you.

But i still get it work.

Also using to different Portal Login on both SSID.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 999

Replies: 2

Related Articles