Disable dhcp server TL-SG1016DE

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Disable dhcp server TL-SG1016DE

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Disable dhcp server TL-SG1016DE
Disable dhcp server TL-SG1016DE
2021-01-22 10:44:28
Model: TL-SG1016DE  
Hardware Version: V2
Firmware Version: 1.0.1 Build 20151218 Rel.58739

Hello,

 

i have a lan in our company with the main router in vlan 192.168.62.0 that serves dhcp to clients.

We also have this tplink switch TL-SG1016DE with vlan 192.168.0.0 and it is attached to one port of the main router.

 

the problem is that the tplink is also have dhcp server enabled and it serves new ip's to clients from lan 192.168.0.0

 

When i disconnect the tplink all works ok but how can i disable the dhcp server on tplink ?

I cannot find a setting for this

 

Best regards

Michael

  0      
  0      
#1
Options
4 Reply
Re:Disable dhcp server TL-SG1016DE
2021-01-22 19:11:34

@infrared 

 

Hey

 

This is a layer2 switch and does not appear to have a DHCP server. Its likely the switch is not on the same subnet as your router and that is the cause of your issue

 

Set one of your PCs to IP address 192.168.0.112 and connect to the switch, you should be able to log into the switch under 192.168.0.1.  Once logged in change the LAN address of the switch to the 192.168.62.x range (or set for DHCP) and this should work, once on the same subnet it should allow the DHCP from your router to pass to clients.

 

If you have a rogue DHCP server I do not believe it to be this device.

 

 

 

  0  
  0  
#2
Options
Re:Disable dhcp server TL-SG1016DE
2021-01-22 19:31:19 - last edited 2021-01-22 19:32:22

Propably i have a rogue DHCP server if this not have dhcp but when i set a client to auto ip in windows 10 then takes ip from 192.168.0.0 and command ipcongig /all gives DHCP is 192.168.0.1 and default gateway 192.168.0.1 that is this router tplink

  0  
  0  
#3
Options
Re:Disable dhcp server TL-SG1016DE
2021-01-22 23:17:00

@infrared 

 

As mentioned try changing the IP of the switch and see how that works, it does sound strange however

  0  
  0  
#4
Options
Re:Disable dhcp server TL-SG1016DE
2021-01-25 10:20:25

This is the ipconfig:

 

Connection-specific DNS Suffix  . :
Description . . . . . . . . . . . : Broadcom 440x 10/100 Integrated Controller
Physical Address. . . . . . . . . : 00-17-A4-E0-1A-1F
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.0.105(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Δευτέρα, 25 Ιανουαρίου 2021 11:45:16 πμ
Lease Expires . . . . . . . . . . : Δευτέρα, 25 Ιανουαρίου 2021 11:45:44 πμ
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 192.168.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled

 

command arp -a

 

192.168.0.1           ec-08-6b-88-56-fd     dynamic
192.168.0.255         ff-ff-ff-ff-ff-ff     static
192.168.1.60          dc-9f-db-e8-e3-0c     dynamic
192.168.62.115        84-ba-3b-15-a3-58     dynamic
192.168.62.116        84-ba-3b-14-d1-23     dynamic
192.168.62.136        1c-1b-0d-f7-4e-4a     dynamic
192.168.62.153        74-d4-35-b0-89-fe     dynamic
224.0.0.2             01-00-5e-00-00-02     static
224.0.0.22            01-00-5e-00-00-16     static
224.0.0.251           01-00-5e-00-00-fb     static
224.0.0.252           01-00-5e-00-00-fc     static
233.233.233.233       01-00-5e-69-e9-e9     static
239.255.102.18        01-00-5e-7f-66-12     static
239.255.255.250       01-00-5e-7f-ff-fa     static
239.255.255.253       01-00-5e-7f-ff-fd     static
255.255.255.255       ff-ff-ff-ff-ff-ff     static

 

ec-08-6b is TPLINK ID

 

and when you browse 192.168.0.1 it is the TPLINK switch as the attached image shows

 

i cannot change for now the ip address of the switch because it has computers that working

 

File:
TPLINK.pngDownload
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 1732

Replies: 4

Related Articles