Business Community > All Threads > TL-R605 VPN - can't see local network
< All Threads

TL-R605 VPN - can't see local network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-R605 VPN - can't see local network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-R605 VPN - can't see local network
TL-R605 VPN - can't see local network
2021-02-03 15:21:12 - last edited 2021-04-16 09:15:59
Model: ER605 (TL-R605)  
Hardware Version: V1
Firmware Version: 1.0.0 Build 20200930 Rel.36519

The situation is as in the picture. TP-LINK TL-R605 router. Previously, I configured everything on ER6020 and it was ok - unfortunately ER6020 is end of life

After connecting to the VPN (L2TP) network, I get an address from the local network and I can see a router or Orange modem. But I cannot see any other computers on the network.

I get an address from a pool set by me with the mask 255.255.255.255. It is incomprehensible that when in a computer in the local network (e.g. in the diagram marked as PC) I manually set the mask to 255.255.255.255, it is available via VPN - I can ping it, connect to RDP etc. I can't leave such a mask ....

What I do not understand? Because something is clearly lame somewhere. Of course, my point is that computers in the LAN should have normal masks (255.255.255.0) but be visible after VPN connection ...
  0      
 
  0      
 
#1
Options
7 Reply
Re:TL-R605 VPN - can't see local network
2021-04-09 20:04:06 - last edited 2021-04-16 09:15:59

@Tomash13 

 

I have the same issue.

The vpn pool cannot be in tha same subnet with the lan subnet.

So the local network should be 192.168.0/24

and the vpn ip pool 192.168.1.0/24

 

  0  
  0  
#2
Options
Re:TL-R605 VPN - can't see local network
2021-04-12 08:20:07 - last edited 2021-04-16 09:15:59

@Tomash13 

yea, it's true. I found the solution, but forget to post here. 

 

It is working like you wrote 

  0  
  0  
#3
Options
Re:TL-R605 VPN - can't see local network
2021-06-12 17:23:43

@Tomash13 

Have the same problem on R605.

After connecting to the VPN I got the mask 255.255.255.255

I need to have  255.255.255.0 like local network.

 

Is this any way to change it to 255.255.255.0 ??

  0  
  0  
#4
Options
Re:TL-R605 VPN - can't see local network
2021-06-13 19:11:51
The VPN IP pool you have to change subnet mask after the / to 24 which would give your 255.255.255.0 example IP Pool:10.0.0.0/24
  0  
  0  
#5
Options
Re:TL-R605 VPN - can't see local network
2021-06-14 04:29:39

@KLX I did this.

KLX wrote

The VPN IP pool you have to change subnet mask after the / to 24 which would give your 255.255.255.0 example IP Pool:10.0.0.0/24

Got the same subnet mask: 255.255.255.255

 

 

 

  1  
  1  
#6
Options
Re:TL-R605 VPN - can't see local network
2021-06-15 06:02:47

When I setup Remote Subnet to completely different ranges 10.0.0.0/24 > got the same subnet mask 255.255.255.255

  1  
  1  
#8
Options
Re:TL-R605 VPN - can't see local network
2021-07-27 08:46:28

@Tomash13 Yes, I have the same issue.

  1  
  1  
#9
Options

Information

Helpful: 0

Views: 3441

Replies: 7

Related Articles
TL-R605 can't adopt
18127 1
TL-R605 with Express VPN
4655 0
R605 vpn cannot see other computers
1207 0
TL-R605 as a VPN only server on current network?
1146 0
TL-R605 VPN Pool
1158 0
TL-R605 VPN capabilities
3469 5
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.