Business Community > All Threads > R605 vpn cannot see other computers
< All Threads

R605 vpn cannot see other computers

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

R605 vpn cannot see other computers

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
R605 vpn cannot see other computers
R605 vpn cannot see other computers
2021-04-01 09:04:01 - last edited 2021-04-16 10:13:00
Model: ER605 (TL-R605)  
Hardware Version: V1
Firmware Version: 1.0.1 Build 20210113 Rel.35074

Just bouthe R605. The main network (DHCP by the router) is in range 172.16.0.1-200, VPN IP pool is 172.16.1.1-50 - not the same subnet as required by instruction: Instruction. Setup L2TP, User: client to NET, local ip 172.16.0.10. Now the remote device connects to the VPN - L2TP tunel status - Local IP 172.16.0.10 Remote Local IP 172.16.1.50 - looks fine but the connected device cannot be seen by any computer in the existing network not the remote device can see any computers. There is no ping either. the local network uses subnet mask 255.255.0.0 yet teh remote device automatically gets 255.255.255.255. Tried using 192.168.x.x network - did not work. No shared resources can be seen, no RDP connection can be established. Basically the entire VPN part does not work at all.

Any help?

  0      
 
  0      
 
#1
Options
2 Reply
Re:R605 vpn cannot see other computers
2021-04-16 10:19:20

Dear @Misho,

 

Misho wrote

Just bouthe R605. The main network (DHCP by the router) is in range 172.16.0.1-200, VPN IP pool is 172.16.1.1-50 - not the same subnet as required by instruction: Instruction. Setup L2TP, User: client to NET, local ip 172.16.0.10. Now the remote device connects to the VPN - L2TP tunel status - Local IP 172.16.0.10 Remote Local IP 172.16.1.50 - looks fine but the connected device cannot be seen by any computer in the existing network not the remote device can see any computers. There is no ping either. the local network uses subnet mask 255.255.0.0 yet teh remote device automatically gets 255.255.255.255. Tried using 192.168.x.x network - did not work. No shared resources can be seen, no RDP connection can be established. Basically the entire VPN part does not work at all.

 

Please read the guide below and check if it helps.

What to do if you cannot access the remote network through Client-to-LAN/Site VPN tunnel

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:R605 vpn cannot see other computers
2021-04-17 17:49:28

Follow up (if someone else is in the same situation)
First of all I should make it clear that before all this the entire thing WAS already working with different VPN server so...
 

I created an IP groups specifically for the VPN pool and DHCP pool
 +manually added routing policies and firewall policies to allow connection between the newly created groups. - that enabled ping but not sharing

Updated all the Windows machines to latest Windows 10x64 (which turned out to be a huge problem due to different reasons but that's another story)
 +manually adding firewall policies
That solved the issues between PCs. For androids completely different apps were needed (still can't explain why)

and that was supposed to be an easy upgrade of the already working VPN.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1207

Replies: 2

Related Articles
TL-R605 with Express VPN
4650 0
TL-R605 VPN - can't see local network
3440 0
TL-ER6020 VPN (ipsec) - can't see all computers in lan
468 0
TL-ER604W Remote VPN Clients cannot see LAN computers
4606 0
Cannot resolve local computers by name
627 8
help! my vpn is working, but i cant see lan computers
10313 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.