@miket0813 

No. It's in the right place. This is just a slow moving forum.

I had similar problems with different hardware and am close to a workable solution for my case. Here's that topic:

https://community.tp-link.com/en/business/forum/topic/257124

Based on your question about port config tab (which I have no idea what that shows) I would suggest you look to see if you can (1) create a port profile and (2) assign that profile to specific ports. I had to create a profile where in the Tagged Networks section I clicked the box for the LAN (VLAN) I created. Then I had to assign this profile in the switch settings to the port my AP is plugged into.

Not that you're asking but the way I understand it is:

• My traffic flows into the AP on, let's say, the IOT SSID. Because I linked that SSID to the VLAN I want that traffic gets tagged with the VLAN #.
• Then on the switch I assigned that port profile I mentioned to the port that the AP is plugged into. So your tagged IOT traffic might flow into your port 10. You've told port 10 basically that there are special rules for your tagged IOT traffic and to treat it differently.
• These rules come from your custom LAN (VLAN) settings.

I'm pretty sure that can't be technically correct but it's the best workable understanding I've been able to cobble together.

Please post your own successes so we can learn from them.