VLAN Configuration - Jetstream Switches

VLAN Configuration - Jetstream Switches

VLAN Configuration - Jetstream Switches
VLAN Configuration - Jetstream Switches
2024-08-22 15:31:15 - last edited 2024-08-22 21:27:32
Model: TL-SX3016F  
Hardware Version: V1
Firmware Version: 1.0.1 Build 20230131 Rel.22035

Hi, 

 

I am new to VLAN configurations and would love to start learning.

 

I have created three different VLANS from Meraki FW and also on Switch below.

Somehow port 14 has both VLANS assuming it works as trunk? I have connected a device on port 14 and set static IP VLAN 50 and 100, can't go out to internet. DHCP isn't working as I was expecting.

 

Any other settings I have to configure from FW or switch?

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:VLAN Configuration - Jetstream Switches-Solution
2024-08-22 16:34:16 - last edited 2024-08-22 21:27:32

  @danny8787 

 

here you will find what you need to know

 

https://community.tp-link.com/en/business/forum/topic/664314

Recommended Solution
  2  
  2  
#2
Options
2 Reply
Re:VLAN Configuration - Jetstream Switches-Solution
2024-08-22 16:34:16 - last edited 2024-08-22 21:27:32

  @danny8787 

 

here you will find what you need to know

 

https://community.tp-link.com/en/business/forum/topic/664314

Recommended Solution
  2  
  2  
#2
Options
Re:VLAN Configuration - Jetstream Switches
2024-08-22 21:11:01

  @MR.S 

 

Thank you so much! It works!

 

I was able to find out that uplink or downlink should be set as tagged and ports that will be set as VLAN set to untagged.

 

 

 

  1  
  1  
#3
Options

Information

Helpful: 0

Views: 252

Replies: 2

Related Articles