how to reset password on: T1600G-52 T2600G-52 T1600G-28

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

how to reset password on: T1600G-52 T2600G-52 T1600G-28

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
how to reset password on: T1600G-52 T2600G-52 T1600G-28
how to reset password on: T1600G-52 T2600G-52 T1600G-28
2021-04-12 10:34:49 - last edited 2021-04-16 07:55:52
Hardware Version: V7
Firmware Version:

Hello,

I have to reset password for a lot of

T1600G-52

T2600G-52

T1600G-28

switches.

is it possible to do that following this guide and connecting a pc to the console port?

https://www.tp-link.com/us/support/faq/2124/
and then selecting password reset feature (option 6 on this guide https://www.tp-link.com/us/configuration-guides/q_a_basic_configuration/?configurationId=2964#_idTextAnchor001) ?

Kindest regards.


 

  0      
  0      
#1
Options
2 Accepted Solutions
Re:how to reset password on: T1600G-52 T2600G-52 T1600G-28-Solution
2021-04-16 07:29:35 - last edited 2021-04-16 07:57:18
T1600G series don't have console port, but it has Reset button. Press reset button for several seconds and you will go to the factory defaults. T2600G series don't have Reset button, while it has Console port. You can connect to it (speed 38400 by default) and do the FAQ. There will be reset option, when you enter BootUtil.
Recommended Solution
  3  
  3  
#2
Options
Re:how to reset password on: T1600G-52 T2600G-52 T1600G-28-Solution
2021-04-16 07:54:05 - last edited 2021-04-16 07:55:52
If you reset switch with a button, it will delete all the configs. There is no way to reset the switch without losing configs, if you forgot your pw. Only if you enabled SNMP before and you know community name, then you can backup cfg without cfg by SNMP, but it is disabled by default.
Recommended Solution
  1  
  1  
#4
Options
3 Reply
Re:how to reset password on: T1600G-52 T2600G-52 T1600G-28-Solution
2021-04-16 07:29:35 - last edited 2021-04-16 07:57:18
T1600G series don't have console port, but it has Reset button. Press reset button for several seconds and you will go to the factory defaults. T2600G series don't have Reset button, while it has Console port. You can connect to it (speed 38400 by default) and do the FAQ. There will be reset option, when you enter BootUtil.
Recommended Solution
  3  
  3  
#2
Options
Re:how to reset password on: T1600G-52 T2600G-52 T1600G-28
2021-04-16 07:50:04
hello, thanks for the answer. In case I reset T1600G to default with the reset button. Do you happen to know how that works? I need to know if it saves the running config somewhere, and then boots with the default configuration. If it does so, I can finally access the switch and see the old running config somewhere and eventually replicate it. I need it because nobody nowhere has the administrative password for those devices.
  0  
  0  
#3
Options
Re:how to reset password on: T1600G-52 T2600G-52 T1600G-28-Solution
2021-04-16 07:54:05 - last edited 2021-04-16 07:55:52
If you reset switch with a button, it will delete all the configs. There is no way to reset the switch without losing configs, if you forgot your pw. Only if you enabled SNMP before and you know community name, then you can backup cfg without cfg by SNMP, but it is disabled by default.
Recommended Solution
  1  
  1  
#4
Options

Information

Helpful: 0

Views: 5666

Replies: 3

Related Articles