Second Ethernet Interface EAP245v3

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Second Ethernet Interface EAP245v3

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Second Ethernet Interface EAP245v3
Second Ethernet Interface EAP245v3
2021-05-24 11:04:10 - last edited 2021-05-25 08:04:31
Model: EAP245  
Hardware Version: V3
Firmware Version:

 

Does anyone know how I can configure the other ethernet interface on EAP245V3 now, this feature changed when Version 5.0 come and I can not find out where to config this now.

 

 

Last Version where I find this settings is in Firmware 2.21.0 

 

 

 

 

/shberge

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Second Ethernet Interface EAP245v3-Solution
2021-05-25 07:32:37 - last edited 2021-05-25 08:04:31

@shberge 

Hi there, the second port on the EAP245 can only work as a normal Ethernet port, cannot set up VLAN on that port, after the firmware upgrade, the new firmware has changed this bug and also delete this option directly.

Even you are using the old firmware 2.21.0, you can see that VLAN setting, in fact after you set it up the VLAN will not take effect.

Recommended Solution
  1  
  1  
#2
Options
3 Reply
Re:Second Ethernet Interface EAP245v3-Solution
2021-05-25 07:32:37 - last edited 2021-05-25 08:04:31

@shberge 

Hi there, the second port on the EAP245 can only work as a normal Ethernet port, cannot set up VLAN on that port, after the firmware upgrade, the new firmware has changed this bug and also delete this option directly.

Even you are using the old firmware 2.21.0, you can see that VLAN setting, in fact after you set it up the VLAN will not take effect.

Recommended Solution
  1  
  1  
#2
Options
Re:Second Ethernet Interface EAP245v3
2021-05-25 07:48:30

@shberge 

 

This is possible only with wall-plate model.


Best Regards

  0  
  0  
#3
Options
Re:Second Ethernet Interface EAP245v3
2021-05-25 08:03:33

@John1234 

 

I do som test and it work with the same out as in. so untagged and tagged pass thru. so that ok. smiley 

 

 

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 796

Replies: 3

Related Articles