TL-SG3428 V2 Switch and Omada SDN
Hello,
I replaced my T2600G-28TS switch with a TL-SG2428 V2.0 because of the compatibility with Omada SDN. Since a data transfer does not work, I transferred the entire configuration by hand. The switch runs for me as a DHCP server with activated IGMP V3.0 snooping and currently regulates 2 VLANs.
Without the connection to Omada, everything runs perfectly as before. If I now activate the connection to Omada, the switch becomes visible as it should be.
If I click on "Adopt", he just doesn't want to connect, despite the correct login data. He constantly reports "Adopt failed" and starts the next attempt. I then deleted the switch and activated support for the cloud controller directly without my config. The connection status goes directly online and it can be successfully connected to Omada. With the config, the status always remains "disabled".
Is it not possible to integrate the switch with the existing configuration into the Omada cloud? 2 T1500 switches and 2 EAP245 APs are currently running in the Omada cloud. The TL-SG3428 is the main switch and network router, the Fritzbox only runs as a VDSL modem and telephone system.
Can the switch be integrated somehow or would I have to completely reconfigure the switch under Omada? That seems to me to be much more difficult than setting it up in advance via your own interface. I hope you can give me a tip.
Thomas