TL-SG3428MP USB connection for reset?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-SG3428MP USB connection for reset?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-SG3428MP USB connection for reset?
TL-SG3428MP USB connection for reset?
2021-07-11 18:05:01 - last edited 2021-07-11 18:39:45
Model: TL-SG3428MP  
Hardware Version: V1
Firmware Version:

Hello,

 

i have a TL-SG3428MP POE switch it was managed by a h/w controller, but i had to reset the controller and now i don't know the login password for TL-SG3428MP.

As i saw the only way it to reset the password by connecting the RJ45 cable to a serial port. 

But, i don't a PC having serial port !!

 

 

Is there another way to connect a common USB cable ? Needs a driver to recognize it as com in windows for hyper terminal reset?

 

kind regards

 

 

e.a 

  0      
  0      
#1
Options
3 Reply
Re:TL-SG3428MP USB connection for reset?
2021-07-13 08:27:49

@BravoMike31 

Yes, you can use a common USB cable to reset it. Resetting steps are the same as the steps of using serial port.

https://www.tp-link.com/en/support/faq/2124/

 

You have to download a driver for the USB cable:

https://www.tp-link.com/en/support/download/tl-sg3428mp/#Driver

  0  
  0  
#2
Options
Re:TL-SG3428MP USB connection for reset?
2021-07-13 14:16:48

@Somnus Thank you for your reply. I have done these already, but without success.

 

The problem now is that even i press "any key" to stop autoboot, the boot continues.

I have try more than 20 times, with 2 different Pcs

The message "Press any key to stop autoboot : 1" appears for less than a second and pressing any keys the terminal ignores them

 

Nest step is to try again without all Ethernet cables from switch, so to be free from any load.

 

Any other idea, is always helpful !!

 

kind regards

 

e.a

  0  
  0  
#3
Options
Re:TL-SG3428MP USB connection for reset?
2021-07-14 17:03:42

Unfortunately the switch is faulty and is going to be checked and replaced.

Thank you for your help !

 

e.a

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 4137

Replies: 3

Related Articles