TL-SG3210 V3, ifInOctets=0
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi to all
i am struggling with SNMP on SG3210
the whole 1.3.6.1.2.1.2.2.1.10 and 1.3.6.1.2.1.2.2.1.16 block is empty
only the two virtual interface are counted
no psihycal port have ifInOctets / ifOutOctets information
any workaround ??
in this state, switch is useless :(
iso.3.6.1.2.1.2.2.1.10.1 = Counter32: 109859
iso.3.6.1.2.1.2.2.1.10.254 = Counter32: 1655311
iso.3.6.1.2.1.2.2.1.10.49153 = Counter32: 0
iso.3.6.1.2.1.2.2.1.10.49154 = Counter32: 0
iso.3.6.1.2.1.2.2.1.10.49155 = Counter32: 0
iso.3.6.1.2.1.2.2.1.10.49156 = Counter32: 0
iso.3.6.1.2.1.2.2.1.10.49157 = Counter32: 0
iso.3.6.1.2.1.2.2.1.10.49158 = Counter32: 0
iso.3.6.1.2.1.2.2.1.10.49159 = Counter32: 0
iso.3.6.1.2.1.2.2.1.10.49160 = Counter32: 0
iso.3.6.1.2.1.2.2.1.10.49161 = Counter32: 0
iso.3.6.1.2.1.2.2.1.10.49162 = Counter32: 0
iso.3.6.1.2.1.2.2.1.16.1 = Counter32: 1385793
iso.3.6.1.2.1.2.2.1.16.254 = Counter32: 4344379
iso.3.6.1.2.1.2.2.1.16.49153 = Counter32: 0
iso.3.6.1.2.1.2.2.1.16.49154 = Counter32: 0
iso.3.6.1.2.1.2.2.1.16.49155 = Counter32: 0
iso.3.6.1.2.1.2.2.1.16.49156 = Counter32: 0
iso.3.6.1.2.1.2.2.1.16.49157 = Counter32: 0
iso.3.6.1.2.1.2.2.1.16.49158 = Counter32: 0
iso.3.6.1.2.1.2.2.1.16.49159 = Counter32: 0
iso.3.6.1.2.1.2.2.1.16.49160 = Counter32: 0
iso.3.6.1.2.1.2.2.1.16.49161 = Counter32: 0
iso.3.6.1.2.1.2.2.1.16.49162 = Counter32: 0
Hi @Fae
yes, it is solved now
last time i checked, there was no new FW for this device
anyway, counting is working
even the CPU is stabilized with this FW
in old release, CPU usage was jumping without reason
this device is used as pure L2 switch with Vlans, no advanced L3 things, so it was really strange
but spikes are off with new FW
