how to enable or activate TL-R605 multiple WAN use same vlan id 500

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

how to enable or activate TL-R605 multiple WAN use same vlan id 500

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
how to enable or activate TL-R605 multiple WAN use same vlan id 500
how to enable or activate TL-R605 multiple WAN use same vlan id 500
2021-08-28 03:35:58 - last edited 2021-09-04 00:13:10
Model: ER605 (TL-R605)  
Hardware Version:
Firmware Version:

hi brothers,

 

how to enable TL-R605 multiple WAN use same vlan id 500. for info i have 2 unifi account with 2 pppoe set. so i did try edit the vlan properties to tag wan2 but failure. any experties here to show me how to handle this?

thank you in advance.

  0      
  0      
#1
Options
1 Accepted Solution
Re:how to enable or activate TL-R605 multiple WAN use same vlan id 500-Solution
2021-09-03 08:49:01 - last edited 2021-09-04 00:13:10

@MaelWM 

 

Hey,

 

You need to add an easy smart switch in front of the second WAN port. The uplink port that connects to ISP should be tagged in VLAN500, and the downlink port that connects to the WAN2 should be untagged, and PVID as 500. Then configure PPPOE normally on WAN2.

Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:how to enable or activate TL-R605 multiple WAN use same vlan id 500-Solution
2021-09-03 08:49:01 - last edited 2021-09-04 00:13:10

@MaelWM 

 

Hey,

 

You need to add an easy smart switch in front of the second WAN port. The uplink port that connects to ISP should be tagged in VLAN500, and the downlink port that connects to the WAN2 should be untagged, and PVID as 500. Then configure PPPOE normally on WAN2.

Recommended Solution
  1  
  1  
#2
Options

Information

Helpful: 0

Views: 1471

Replies: 1

Related Articles