Home

Forums

Stories

Knowledge Base

Business Community > All Threads > ER7206 - Limiting Wifi to Wan1

< All Threads

ER7206 - Limiting Wifi to Wan1

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER7206 - Limiting Wifi to Wan1

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER7206 - Limiting Wifi to Wan1

2021-12-02 19:41:30 - last edited 2021-12-25 20:45:27

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2021-12-02

ER7206 - Limiting Wifi to Wan1

2021-12-02 19:41:30 - last edited 2021-12-25 20:45:27

Model: ER7206 (TL-ER7206)

Hardware Version: V1

Firmware Version: 1.1.1 Build 20210723 Rel.64359

Using the ER7206 I use two internet connections (WAN1/WAN2).

I have a direct ethernet connection to LAN2 and a WIFI router connected to LAN1.

How can I set the LAN1 to access only WAN1?

Example setup

WAN1 - Internet1
WAN2 - Internet2
LAN1 WIFI - *Only allow to connect to WAN1
LAN2 Ethernet - Allow to connect to both WAN1 and WAN2

Any help would be greatly appreciated!

0

0

#1

1 Accepted Solution

LV4

2021-12-03 05:59:46 - last edited 2021-12-25 20:45:27

Posts: 502

Helpful: 67

Solutions: 12

Stories: 0

Registered: 2021-05-21

Re:ER7206 - Limiting Wifi to Wan1-Solution

2021-12-03 05:59:46 - last edited 2021-12-25 20:45:27

Policy Routing, define the IP. Not really limiting WiFI.. Router's getting an IP, you define this IP to using WAN1. That seems to be what you need

https://www.tp-link.com/us/support/faq/2134/

If you don't define the other connection, it'll be using Load Balance. WAN1&2

Recommended Solution

1

1

#2

2 Reply

LV4

2021-12-03 05:59:46 - last edited 2021-12-25 20:45:27

Posts: 502

Helpful: 67

Solutions: 12

Stories: 0

Registered: 2021-05-21

Re:ER7206 - Limiting Wifi to Wan1-Solution

2021-12-03 05:59:46 - last edited 2021-12-25 20:45:27

Policy Routing, define the IP. Not really limiting WiFI.. Router's getting an IP, you define this IP to using WAN1. That seems to be what you need

https://www.tp-link.com/us/support/faq/2134/

If you don't define the other connection, it'll be using Load Balance. WAN1&2

Recommended Solution

1

1

#2

LV1

2021-12-03 13:13:40

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2021-12-02

Re:ER7206 - Limiting Wifi to Wan1

2021-12-03 13:13:40

@John1234 That makes sense. I'll try that today. Thank you.

0

0

#3

2021-12-02 19:41:30 - last edited 2021-12-25 20:45:27

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2021-12-02

Information

Helpful: 0

Views: 1115

Replies: 2