Stealth Ports in ER7206

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Stealth Ports in ER7206

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Stealth Ports in ER7206
Stealth Ports in ER7206
2021-12-15 10:22:26 - last edited 2023-06-05 02:38:07
Model: ER7206 (TL-ER7206)  
Hardware Version: V1
Firmware Version: V1_1.1.1_20210723

Has the stealth port problem been fixed yet in the ER7206 firmware ?

Yes, I know there are workarounds (hacks) but this should of been fixed by the firmware.
I really hope TP-Link is reading these posts, it seems most folks are having the same issue when validating with ShieldsUp! (grc.com)
I have a significant amount of hardware in my business which is going to end up on ebay if this doesn't get fixed asap.

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Stealth Ports in ER7206-Solution
2022-01-19 11:06:46 - last edited 2023-06-05 02:37:49

Dear @CoolNet,

 

CoolNet wrote

Has the stealth port problem been fixed yet in the ER7206 firmware ?

Yes, I know there are workarounds (hacks) but this should of been fixed by the firmware.
I really hope TP-Link is reading these posts, it seems most folks are having the same issue when validating with ShieldsUp! (grc.com)

 

The R&D team has made a Beta firmware to optimize the issue above. 

 

Welcome to install the Beta firmware and comment with your feedback from the solution post below:

 

 Solution  Omada Gateway Cannot Get Full Stealth On The GRC ShieldsUp Test.

 

Updated on Jan 30th 2023: 

The official firmware has been released to fix the Full Stealth issue, check the above solution post for details.

 

For ER605 v1/v1.6, ER7206 v1/v1.6, please upgrade to official firmware 1.2.1 or above.

For ER605 v2/v2.6, please upgrade to official firmware 2.1.1 or above.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:Stealth Ports in ER7206-Solution
2022-01-19 11:06:46 - last edited 2023-06-05 02:37:49

Dear @CoolNet,

 

CoolNet wrote

Has the stealth port problem been fixed yet in the ER7206 firmware ?

Yes, I know there are workarounds (hacks) but this should of been fixed by the firmware.
I really hope TP-Link is reading these posts, it seems most folks are having the same issue when validating with ShieldsUp! (grc.com)

 

The R&D team has made a Beta firmware to optimize the issue above. 

 

Welcome to install the Beta firmware and comment with your feedback from the solution post below:

 

 Solution  Omada Gateway Cannot Get Full Stealth On The GRC ShieldsUp Test.

 

Updated on Jan 30th 2023: 

The official firmware has been released to fix the Full Stealth issue, check the above solution post for details.

 

For ER605 v1/v1.6, ER7206 v1/v1.6, please upgrade to official firmware 1.2.1 or above.

For ER605 v2/v2.6, please upgrade to official firmware 2.1.1 or above.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#2
Options
Re:Stealth Ports in ER7206
2022-02-11 22:41:40

Frustratingly, the new 1.2 firmware breaks this again. No stealth ports if you update. Rolling bck now 🙄

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 999

Replies: 2

Related Articles