Business Community > All Threads > Can a client CPE510 also authenticate other laptop clients
< All Threads

Can a client CPE510 also authenticate other laptop clients

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can a client CPE510 also authenticate other laptop clients

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can a client CPE510 also authenticate other laptop clients
Can a client CPE510 also authenticate other laptop clients
2021-12-11 10:05:56 - last edited 2021-12-13 13:04:31
Model: CPE510  
Hardware Version: V3
Firmware Version: 20201028

Hello Everyone,

 

I have two CPE510's spaced 200 meters apart to connect a workshop to the network

 

"master" CPE510 is set to Access Point

"remote" CPE510 is set to Client and "lock to AP"

 

Is it possible to get the remote CPE510 to also pass through requests from phones and laptops so these client devices can connect in the workshop?

 

Second question, where can I find definitive instructions on how and what the features of a CPE510 can do:  Bridge, Repeater, AP, Client, etc....  when to use what etc..

 

Many thanks

Oscar

 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Can a client CPE510 also authenticate other laptop clients-Solution
2021-12-13 09:04:59 - last edited 2021-12-13 13:04:31

@RemoteOscar 

 

I asked once before, here is the original text below:

 

As the 2nd CPE will work under client mode which means to transfer wireless signal to wired signal, so it will not broadcast wireless signal. If you need wireless signal in the other building, you need to connect another AP or wireless router after the 2nd CPE to broadcast Wi-Fi.

For more details about this application, you can refer to the link below:

https://www.tp-link.com/en/configuration-guides/common-applications-for-pharos-products/?configurationId=22033 (Point to Point)

 

As for how to choose the mode, here is indeed the guidance, take a look: https://www.tp-link.com/en/support/faq/2090/

 

 

Just striving to develop myself while helping others.
Recommended Solution
  1  
  1  
#2
Options
2 Reply
Re:Can a client CPE510 also authenticate other laptop clients-Solution
2021-12-13 09:04:59 - last edited 2021-12-13 13:04:31

@RemoteOscar 

 

I asked once before, here is the original text below:

 

As the 2nd CPE will work under client mode which means to transfer wireless signal to wired signal, so it will not broadcast wireless signal. If you need wireless signal in the other building, you need to connect another AP or wireless router after the 2nd CPE to broadcast Wi-Fi.

For more details about this application, you can refer to the link below:

https://www.tp-link.com/en/configuration-guides/common-applications-for-pharos-products/?configurationId=22033 (Point to Point)

 

As for how to choose the mode, here is indeed the guidance, take a look: https://www.tp-link.com/en/support/faq/2090/

 

 

Just striving to develop myself while helping others.
Recommended Solution
  1  
  1  
#2
Options
Re:Can a client CPE510 also authenticate other laptop clients
2021-12-13 13:05:05
Many thanks for your response!
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 654

Replies: 2

Related Articles
CPE510 - Client Mode - Wireless connections fail to authenticate
882 0
(CPE510 AP) to (CPE510 Client)
1378 0
CPE510, Router/Client connectivity issue
484 0
CPE510 configured to Client mode but no internet
11990 0
CPE510 in client mode shows N/A for wireless signal quality
848 0
[SOLVED] PTMP Setup CPE510 - client remote management
659 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.