Home

Forums

Stories

Knowledge Base

Business Community > All Threads > TL-SG3210 Chaning Default IP Address

< All Threads

TL-SG3210 Chaning Default IP Address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-SG3210 Chaning Default IP Address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

PLCMAN58

2021-12-25 03:38:13

Posts: 18

Helpful: 8

Solutions: 2

Stories: 0

Registered: 2017-11-29

TL-SG3210 Chaning Default IP Address

2021-12-25 03:38:13

Model: TL-SG3210

Hardware Version: V3

Firmware Version: 3.0.2 - 20210806 Reference 55686

I am attempting to change the IP address of the TL-SG3210 and cannot get it to take. I am following the directions in the manual and am attempting to edit the VLAN1 with the VLAN interface IP 192.168.0.1.

I am attempting to change the IP address to 10.0.0.3 Subnet Mask: 255.255.255.0 and Gateway: 10.0.0.1. I have tried it at least four times with teh same results. The IP address is not accepted and the switch requires a reboot in order to recover to the default IP address of 192.168.0.1.

2 Reply

Yannie

LV4

2021-12-27 05:34:14

Posts: 449

Helpful: 205

Solutions: 28

Stories: 0

Registered: 2020-06-30

Re:TL-SG3210 Chaning Default IP Address

2021-12-27 05:34:14

@PLCMAN58

You did mention that you followed the manual. This one maybe?

https://www.tp-link.com/en/support/faq/2122/

L3 features>interface, I guess we can edit that on your switch.

Make sure you hit the , any luck with that?

PLCMAN58

LV1

2021-12-29 23:40:55

Posts: 18

Helpful: 8

Solutions: 2

Stories: 0

Registered: 2017-11-29

Re:TL-SG3210 Chaning Default IP Address

2021-12-29 23:40:55

Thanks for the reply. I switched to another computer where I had a static IP address assigned in the range of 10.0.0.xxx instead of using DHCP. I was able to assign the required 192.168.0.xxx to gain access to the TP-LINK 192.168.0.1 default address. I followed the same procedure as before and the TP-LINK switch now has the proper 10.0.0.xxx address.

PLCMAN58

2021-12-25 03:38:13

Posts: 18

Helpful: 8

Solutions: 2

Stories: 0

Registered: 2017-11-29

Information

Helpful: 2

Replies: 2

TL-SG3210 Chaning Default IP Address

TL-SG3210 Chaning Default IP Address

Information

Voters 0

Tags