How to integrate the router TL-R605 into an existing network managed by OC200 with captive portal

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to integrate the router TL-R605 into an existing network managed by OC200 with captive portal

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to integrate the router TL-R605 into an existing network managed by OC200 with captive portal
How to integrate the router TL-R605 into an existing network managed by OC200 with captive portal
2021-12-27 09:36:07
Model: OC200  
Hardware Version: V1
Firmware Version: V4.4.6 1.9.3 Build 20210914 Rel.39903


Already made 3 attempts to integrate the router TL-R605 into my existing network with OC200, but each time no internet connection.

 

 Omada SDN Network (192.168.0.1/24)

 

 - TL-R605 stand alone V1.1.1

 - TL-SG2210P V4.0.1

 - TL-SG2210MP V1.0.2

 - 4 EAP245 V5.0.3

 - EAP225 V5.0.5

 - OC200 V4.4.6 with captive portal interface 192.168.0.1/24 (automatically created), used for guest access visitors

 

 

 After the adoption of TL-R605 (after reset) in OC200 no more internet connection.  So no more WiFi and no access to 0C200.  Wired connection via the portal (voucher required).  Apparently the standard interface of TL-R605 192.168.0.1/24 is put over the existing portal interface, so that only wired internet access is available via the captive portal.

 

 Backup OC200 restored and TL-R05 restored stand alone.

 

 How can I integrate the TL-R605 in the OC200 (in service for 2 years already) with internet access on the one hand via the LAN and on the other hand via the captive portal for visitors.  I want to be able to manage the visitors on the portal through the interface 192.168.0.1/24.

 

 Presumably, two interfaces and thus two subnet's have to be created in the OC200 when adopting TL-R605.

 

 How can I manage these two subnet's together without additional adjustments in the router TL-R605?

 

  0      
  0      
#1
Options
1 Reply
Re:How to integrate the router TL-R605 into an existing network managed by OC200 with captive portal
2021-12-28 08:45:05

@TQJ5300 

 

From my experiences, you can try to upgrade the OC200 to the latest version. I mean V5.0.29, and you can configure everything in advance. Then adopt the router.

 

Upgrading the controller from V4 to V5 normally won't delete all your settings but it's better for you to keep the backup file, just in case.

 

See if this will work out for you.

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 626

Replies: 1

Related Articles